DG-ACC-JBST Digi International, DG-ACC-JBST Datasheet - Page 119

• Manufacturer Part Number: DG-ACC-JBST
• Description: JTAG-BOOSTER FOR NETSILICON 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of DG-ACC-JBST

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: NetSilicon NS9360, NS9750, NS9775
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FS-9051; FS-9051

Support for Windows NT, Windows 2000 and Windows XP
3
4
5
6
7
8
9
10
11
12
In this example one block must be erased.
A configured run time version of the “Kithara DOS Enabler, Version 6.x” is used to give
support for some of the DOS based tools (such as the JTAG-Booster) for Windows NT,
Windows 2000, and Windows XP. After installation of the “DOS Enabler,” the accesses
to the LPT ports are allowed for all programs listed in file
Note:
Important:
The resulting I/O-address of the parallel port is printed here.
A JTAG-Booster is found on the parallel port
The JTAG chain is analyzed. There may be several parts in the JTAG chain. The
chain is analyzed and all parts except the Intel PXA27x are switched to bypass
mode.
The revision (1
Revision 3
Revision 4
The length of all instruction registers in the JTAG chain are added.
The position of the Intel XScale in the JTAG chain is assumed to be zero, if not
specified in the command line (see option
The position of the JTAG instruction register of the Intel XScale is assumed to be
zero, if not specified in the command line (see option
The real length of the boundary scan register is displayed here and compared
with the boundary scan register length of an Intel PXA270.
Two Flashes Intel 28F128 selected with CS0# where found.
The resulting data bus size is printed here.
Accesses to the ports are allowed only for the programs listed in file
Readme_WinNT.txt
not work.
You need administrator rights to install or uninstall this program.
PXA270 C0 BGA
PXA270 C0 MCP
st
digit of the ID) shows the mask stepping:
. If you rename one of the Digi tools, the DOS Enabler does
w w w . d i g i . c o m
J T A G - B o o s t e r f o r I n t e l X S c a l e P X A 2 7 0
/CPUPOS=
).
Readme_WinNT.txt
/IROFFS=
).
1 0 7