HS2556EPI61H Renesas Electronics America, HS2556EPI61H Datasheet - Page 233

• Manufacturer Part Number: HS2556EPI61H
• Description: EMULATOR BASE H8SX/2556
• Manufacturer: Renesas Electronics America

Specifications of HS2556EPI61H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

This section describes the diagnostic test procedure using the E6000 test program.
D.1
To execute the test program, use the following hardware; do not connect the user system interface cable and user
system.
• E6000 emulator (HS2556EPI61H or HS2556EPI62H)
• Host computer
• The E6000 PC interface board (select either from the followings according to the PC interface
1. Install the E6000 PC interface board in the host computer and connect the supplied PC interface cable to the
2. Connect the PC interface cable to the emulator.
3. Connect the supplied AC adapter to the emulator.
4. Initiate the host computer to make it enter DOS prompt command input wait state.
5. Turn on the emulator power switch.
specifications):
PCI bus interface board (HS6000EIC01H or HS6000EIC02H)
PCMCIA interface card (HS6000EIP01H)
LAN adapter (HS6000ELN01H)
USB interface adapter (HS6000EIU01H or HS6000EIU02H)
board.
System Set-Up for Test Program Execution
Appendix D Diagnostic Test Procedure
211