UP2-DEVKIT/UNIV Altera, UP2-DEVKIT/UNIV Datasheet - Page 5

• Manufacturer Part Number: UP2-DEVKIT/UNIV
• Description: KIT DEVELOPMENT UNIVERSITY UP2
• Manufacturer: Altera
• Type: Education Kitr

Specifications of UP2-DEVKIT/UNIV

• Contents: Quartus®II Design Software, UP2 Dev. Board, Byteblaster Download Cable and Power Supply
• For Use With/related Products: Flex 10K® FPGAs
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 544-1293

Altera Corporation
f
Figure 2. Position of C1, C2 & C3 Connectors
Table 2 defines the settings for each configuration.
Notes to Table 2:
(1)
(2)
During configuration, the green CONF_D LED will turn off and the green
TCK LED will modulate to indicate that data is transferring. After the
device has successfully configured, the CONF_D LED will illuminate.
For information on how to program or configure the EPF10K70, or
EPM7128S devices, see “Programming or Configuring Devices” on page
18.
Program EPM7128S device
only
Configure FLEX 10K
device only
Program/configure both
devices (1)
Connect multiple boards
together (2)
Table 2. JTAG Jumper Settings
The first device in the JTAG chain is the FLEX 10K device, and the second device is
the EPM7128S device.
The first device in the JTAG chain is the FLEX 10K device, and the second device is
the EPM7128S device. The last board in the chain must be set for a single board
configuration (i.e., for programming only the EPM7128S device, configuring only
the FLEX 10K device, or configuring/programming both devices). The last board
cannot be set for connecting multiple boards together.
Desired Action
TDI
C1
C2
C3
University Program UP2 Education Kit User Guide
C1 & C2
C2 & C3
C2 & C3
C2 & C3
TDO
TDI
C1
C2
C3
DEVICE BOARD
C1
C2
C3
C1 & C2
C2 & C3
C1 & C2
OPEN
TDO
C2
C3
C1
C1 & C2
C1 & C2
C2 & C3
C2 & C3
DEVICE
C1 & C2
C1 & C2
C1 & C2
C2 & C3
BOARD
5