UP2-DEVKIT/UNIV Altera, UP2-DEVKIT/UNIV Datasheet - Page 21

• Manufacturer Part Number: UP2-DEVKIT/UNIV
• Description: KIT DEVELOPMENT UNIVERSITY UP2
• Manufacturer: Altera
• Type: Education Kitr

Specifications of UP2-DEVKIT/UNIV

• Contents: Quartus®II Design Software, UP2 Dev. Board, Byteblaster Download Cable and Power Supply
• For Use With/related Products: Flex 10K® FPGAs
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 544-1293

Altera Corporation
f
Setting the JTAG Options in the Quartus II Software for EPF10K70
Configuration
The following steps describe how to use the Quartus II software to
configure the EPF10K70 device in a JTAG chain.
1.
2.
3.
4.
5.
6.
7.
8.
9.
For more information on how to configure a device, see the Quartus II
Help.
Turn on the Multi-Device JTAG Chain command (JTAG menu) in
the Quartus II Programmer to configure the EPF10K70 device.
Follow this step even if you are only programming one device.
Choose Multi-Device JTAG Chain Setup (JTAG menu).
Select EPF10K70 in the Device Name list in the Multi-Device JTAG
Chain Setup dialog box.
Type the name of the programming file for the EPF10K70 device in
the Programming File Name box. You can also use the Select
Programming File button to browse your computer’s directory
structure to locate the appropriate programming file.
Click Add to add the device and associated programming file to the
Device Names & Programming File Names box. The number to the
left of the device name shows the order of the device in the JTAG
chain. The device’s associated programming file is displayed on the
same line as the device name. If no programming file is associated
with a device, “<none>” is displayed next to the device name.
Click Detect JTAG Chain Info to have the ByteBlaster II cable check
the device count, JTAG ID code, and total instruction length of the
JTAG chain. A message just above the Detect JTAG Chain Info
button reports the information detected by the ByteBlaster II cable.
You must manually verify that this message matches the information
in the Device Names & Programming File Names box.
Click Save JCF to save the current settings to a JCF for future use.
Type the name of the file in the File Name box and then select the
desired directory in the Directories box in the Save JCF dialog box.
Click OK.
Click OK to save your changes.
Click Configure in the Quartus II Programmer.
University Program UP2 Education Kit User Guide
21