COP8-PGMA-DS44P National Semiconductor, COP8-PGMA-DS44P Datasheet - Page 22

• Manufacturer Part Number: COP8-PGMA-DS44P
• Description: PGMR ADAPTER/COP8 DIP,SOIC,PLCC
• Manufacturer: National Semiconductor

Specifications of COP8-PGMA-DS44P

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: *COP8-PGMA-DS44P

www.national.com
BYTES and CYCLES per
INSTRUCTION
Option List
The mask programmable options are listed out below. The
options are programmed at the same time as the ROM
pattern to provide the user with hardware flexibility to use a
variety of oscillator configuration.
OPTION 1: CKI INPUT
OPTION 2: BONDING
The following option information is to be sent to National
along with the EPROM.
Option Data
Option 1 Value__is: CKI Input
Option 2 Value__is: COP Bonding
Development Support
SUMMARY
= 1 Crystal
= 2 External (CKI/10) CKO available as G7 input
= 3 R/C
= 1 44-Pin PLCC
= 2 40-Pin DIP
= 3 28-Pin SO
= 4 28-Pin DIP
• iceMASTER
• COP8 Debug Module: Moderate cost in-circuit emulation
• COP8
• Assembler: COP8-DEV-IBMA. A DOS installable cross
• C Compiler: COP8C. A DOS installable cross develop-
Unused
Opcode
emulation for all COP8 products. A full set of COP8 Basic
and Feature Family device and package specific probes
are available.
and development programming unit.
EPU-COP880C — low cost In-circuit simulation and de-
velopment programming unit.
development Assembler, Linker, Librarian and Utility Soft-
ware Development Tool Kit.
ment Software Tool Kit.
8C
9F
A7
A8
60
61
62
63
67
99
Evaluation
(CKI/10) CKO for crystal configuration
(CKI/10) CKO available as G7 input
Instruction
™
LD [B], # i
X A, [B]
NOP
NOP
NOP
NOP
NOP
NOP
NOP
RET
: IM-COP8/400 — Full feature in-circuit
(Continued)
and
Unused
Opcode
AF
BF
A9
B1
B4
B5
B7
B9
Programming
Instruction
LD A, [B]
LD A, [X]
C
X A, [X]
NOP
NOP
NOP
NOP
HC
Unit:
22
• OTP/EPROM Programmer Support: Covering needs
iceMASTER (IM) IN-CIRCUIT EMULATION
The iceMASTER IM-COP8/400 is a full feature, PC based,
in-circuit emulation tool developed and marketed by Met-
aLink Corporation to support the whole COP8 family of
products. National is a resale vendor for these products.
See Figure 12 for configuration.
The iceMASTER IM-COP8/400 with its device specific
COP8 Probe provides a rich feature set for developing,
testing and maintaining product:
• Real-time in-circuit emulation; full 2.4V–5.5V operation
• Direct connection to application board by package com-
• Full 32 kbyte of loadable programming space that over-
• Full 4k frame synchronous trace memory. Address, in-
• A full 64k hardware configurable break, trace on, trace off
• Tool
• Real time performance profiling analysis; selectable
• Watch windows, content updated automatically at each
• Instruction by instruction memory/register changes dis-
• Single base unit and debugger software reconfigurable to
• Processor specific symbolic display of registers and bit
• Halt/Idle mode notification.
• On-line HELP customized to specific processor using
• Includes a copy of COP8-DEV-IBMA assembler and
from engineering prototype, pilot production to full pro-
duction environments.
range, full DC-10 MHz clock. Chip options are program-
mable or jumper selectable.
patible socket or surface mount assembly.
lays (replaces) the on-chip ROM or EPROM. On-chip
RAM and I/O blocks are used directly or recreated on the
probe as necessary.
struction, and 8 unspecified, circuit connectable trace
lines. Display can be HLL source (e.g., C source), as-
sembly or mixed.
control, and pass count increment events.
debugger — supports both assembler (COFF) and C
Compiler (.COD) linked object formats.
bucket definition.
execution break.
played on source window when in single step operation.
support the entire COP8 family; only the probe personal-
ity needs to change. Debugger software is processor
customized, and reconfigured from a master model file.
level assignments, configured from master model file.
master model file.
linker SDK.
set
integrated
interactive
symbolic