ST92F150-EMU2 STMicroelectronics, ST92F150-EMU2 Datasheet - Page 12

• Manufacturer Part Number: ST92F150-EMU2
• Description: BOARD EMULATOR FOR ST9 SERIES
• Manufacturer: STMicroelectronics
• Series: ST9-EMU2r
• Type: Microcontrollerr

Specifications of ST92F150-EMU2

• Contents: ST9 Visual Debug IDE, ST9 HDS2V2 Mainboard, Probe, Sockets, Adapters, Power Supply,Cables & Documentation
• For Use With/related Products: ST9 MCUs
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-3101

2 - Getting Started
2.3
2.4
12/55
•
•
•
•
Before you start...
Be careful that neither the emulator nor application board is powered up before the
entire installation session has been performed. The emulator should be powered
up first, followed by your application board, in order to prevent damage to the
probe.
Installing the emulator hardware
The ST9 HDS2V2 emulator is connected through the parallel port to a PC
computer which runs the control software (ST9+ Visual Debug) as explained later.
To connect your ST9 HDS2V2 emulator, you will have to follow these general
steps:
1
2
3
4
5
A connection flow diagram is shown in
is described in detail in the following sections.
three flat cables with ferrites for connection between the probe and emulator
mainboard,
an analyser probe cable,
the “MCU on CD” CD-ROM, containing both the ST9+ V4.3x and V6.x
Software Toolchains (each software toolchain includes a Graphical Windows
Debugger and its on-line help),
this manual.
Connect the ST9 HDS2V2 to your PC using the parallel cable provided.
Connect the three flat cables of your ST9 HDS2V2 emulator to the emulation
probe connectors.
Connect the appropriate device adapter to the emulation probe, then connect
the device adapter to the matching socket on your application board.
Connect the power supply cable between the power supply block and the power
connector located on the rear panel of your ST9 HDS2V2 emulator.
Power up the emulator and then connect your application power supply.
Figure 2
on page 13. Each installation step
ST92F150-EMU2 User Manual