FS-9062 Digi International, FS-9062 Datasheet - Page 41

• Manufacturer Part Number: FS-9062
• Description: JTAG_BOOSTER FOR ANALOG DEVICES
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-9062

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: ADI, ADSP-BF531, 532, 533, 561
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

/OFFSET=hhhhhh
Reading of the flash memory starts at an offset of hhhhhh relative to the start
address of the flash device. If the offset is negative, the offset specifies a
address relative to the end of the flash device.
See also option /TOP.
Default:
Abbreviation:
/TOP
If the option /TOP is used the option /OFFSET= specifies the address where
reading ends (plus one) instead of the starting address.
/LENGTH=hhhhhh
The number of read bytes may be limited to LENGTH. If no LENGTH is specified
the whole flash device is read (if no offset is specified).
/CS0 /CS1 /CS2 /CS3
See function /P (Chapter 2.1)
/NOWRSETUP
See function /P (Chapter 2.1)
Please note: In the function /R write cycles are needed to detect the type of the
flash memory.
Example:
JTBFxxx /R BIOS.ABS /L=10000 /TOP
This example may be used to read the upper most 64 Kbyte of the flash memory
to the file BIOS.ABS.
JTAG_ADSP-BLACKFINa.doc
/OFFSET=0
/O=
JTAG-Booster for Analog Devices Blackfin
41