HS2633REPI61H-U Renesas Electronics America, HS2633REPI61H-U Datasheet - Page 209

• Manufacturer Part Number: HS2633REPI61H-U
• Description: EMULATOR BASE UNIT H8S/2633R FAM
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS2633REPI61H-U

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8S/2633R
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

8.1.7
Selecting [View -> CPU -> Extended Monitor] or clicking the [Extended Monitor] toolbar button displays the
[Extended Monitor] window. This emulator displays the following items.
Table 8.6
Note: In this emulator, the update interval in the [Extended Monitor] window cannot be selected or changed.
[Item] Column
User Standby
User NMI
User Reset
User Wait
User System Voltage
User System Voltage2
User Cable
Running status
ROM Write
Target Mode
Target Clock
Extended Monitor Function
[Extended Monitor] Window Items
Displays the status of the NMI pin.
Displays the address bus value in the MCU and the status of the CPU while
[Value] Column
Displays the status of the standby pin.
Displays the status of the reset pin.
Displays the status of the wait pin ("Inactive" is displayed if no corresponding
pins exist).
Displays whether or not the user VCC (PVCC when the E6000 H8S/2633
Emulator CPU 2600 debugging platform is selected) is equals to or exceeds
the value set by [User VCC Threshold] in [Configure Platform].
Displays whether or not the user VCC is supplied (this is only available when
the E6000 H8S/2633 Emulator CPU 2600 debugging platform is selected).
Displays whether or not the user cable is connected.
the user program is running, and the cause of a break while the user program
is halted.
Break = <Cause of break>: Displays the cause of a break.
Address = <Address bus value>:
Displays the address bus value during the user program execution. While in
subactive mode, ‘(SubActive)’ is displayed after the address bus value.
Status = <Status of the CPU>: Displays the status of the CPU.
Displays whether or not the ROM has been written to during the user program
execution.
Once the ROM has been written to, the state is retained until the Configure
Platform is set again.
Displays the mode to be input from the user system.
Displays whether or not there is a clock signal to be input from the user
system.
PREFETCH: CPU instruction prefetch cycles
DATA: CPU data access cycles
DMAC: Operation of DMAC
DTC: Operation of DTC
SLEEP: Sleep mode
STANDBY: Standby mode
WATCH: Watch mode
SUBSLEEP: Subsleep mode
REFRESH: Refresh cycles
189