M3062PT3-CPE-4 Renesas Electronics America, M3062PT3-CPE-4 Datasheet - Page 56

• Manufacturer Part Number: M3062PT3-CPE-4
• Description: DEV COMPACT EMULATOR M16C/26A,28
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M3062PT3-CPE-4

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/62P
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M3062PT3-CPE User’s Manual
3.3 MCU Setting Dialog Box
The MCU Setting dialog box is used to set the user system information. It is displayed after you closed the Init dialog box.
When you have finished the settings of 1 to 3, click OK
(1) MCU tab
1. Specifying the processor mode
*1 When the emulation memory board R0E33062PMSRC0 (not included) was connected, MAP tab is displayed.
REJ10J1007-0400 Rev.4.00 July 29, 2009
Notes on Selecting a Processor Mode:
When setting single-chip mode or memory expansion mode, the level of pin CNVSS of the MCU status should
be "L".
When setting microprocessor mode, the level of pin CNVSS of the MCU status should be "H".
(This mode can be set only when using the emulation memory board R0E33062PMSRC0.)
When setting memory expansion mode or microprocessor mode, pins RDY# and HOLD# of the user system
should be "H".
When the user system is not connected (targetless), following modes are available.
(1) When not using the emulation memory board, single-chip mode and memory expansion mode are available.
(2) When using the emulation memory board, all modes are available.
IMPORTANT
Specifying the processor mode
Select the appropriate processor mode that suits your system.
Specifying the bus width
When specifying memory expansion mode or microprocessor
mode, select “16-bit” or “8-bit” for “External Data Bus Width”.
Using or not using the memory space
expansion function
Specifies whether or not to use the memory space expansion
function
microprocessor mode. When using the memory space expansion
function, select “4MB Mode”. When not, select “Normal Mode”
Using or not using the internal reserved area
expansion
Specifies whether or not to expand the internal reserved area.
Check the box if the internal reserved area expansion bit (PM13)
is “1”.
PM13 = 0:
Internal RAM area: 00400h--03FFFh
Internal ROM area: D0000h--FFFFFh
PM13 = 1:
Internal RAM area: 00400h--07FFFh
Internal ROM area: 80000h--FFFFFh
Specifying the PM10 (bit 0 of the address
00005h)
When using the CS2 Area Switch Bit (PM10) as “1”, check this
box. Specify the processor mode according to the user system.
3. Usage (How to Use the Emulator Debugger)
when
selecting
memory
expansion
Page 54 of 108
mode
or