HS0005KCU11H Renesas Electronics America, HS0005KCU11H Datasheet - Page 107

• Manufacturer Part Number: HS0005KCU11H
• Description: EMULATOR E10A-USB H8S(X),SH2(A)
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS0005KCU11H

• Contents: E10A-LITE, Cable and CD-ROM
• Core Architecture: H8S, H8SX And SH2
• Kit Contents: E10A-LITE, Cable And CD-ROM
• Features: H-UDI Interface, 14-Way Cable
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Core Sub-architecture: H8S, H8SX, SH2
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: H8S, H8SX, SH-2, SH-2A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

[JTAG clock] combo box
[Flash memory synchronization]
combo box
Sets the frequency
Selects whether or not the contents of the flash memory are
acquired by the emulator when the user program is stopped or
the position where the PC break is set is put back as the
original code.
When the flash memory is not reprogrammed by the user
program, its contents need not be acquired by the emulator.
If there is no problem with the state that the program in the
flash memory has been replaced as the PC break code, the
position where the PC break is set needs not be put back as
the original code.
•
•
•
•
Disable:
Read or program is not performed for the flash memory
except when the emulator is activated, the flash memory
area is modified, and the settings of the PC break to the
flash memory area are changed.
PC to flash memory:
When the user program is stopped, the specified PC break
code is replaced as the original instruction. Select this
option if there is a problem with the state that the program in
the flash memory has been replaced as the PC break code.
Flash memory to PC:
When the user program is stopped, the contents of the flash
memory are read by the emulator. Select this option if the
flash memory is reprogrammed by the user program.
PC to flash memory, Flash memory to PC:
When the user program is stopped, the contents of the flash
memory are read by the emulator and the specified PC
break code is replaced as the original instruction. Select this
option if the flash memory is reprogrammed by the user
program and there is a problem with the state that the
program in the flash memory has been replaced as the PC
break code.
*2
of the JTAG clock.
Rev. 12.00 Aug. 28, 2009 Page 87 of 188
Section 5 Debugging
REJ10J1140-1200