DEMOKIT-LG2 Renesas Electronics America, DEMOKIT-LG2 Datasheet - Page 54

• Manufacturer Part Number: DEMOKIT-LG2
• Description: KIT DEMO 78K0 LG2 UPD78F0397
• Manufacturer: Renesas Electronics America

Specifications of DEMOKIT-LG2

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DemoKit-LG2 User’s Manual
7. How to Use the FPL3 Flash Programming Software
7.1 Installing the FPL3 GUI software
7.2 Installing the Driver
7.3 Installing the Parameter File
48
This section explains the basic operation of the FPL3 GUI for programming the DemoKit-LG2 board,
including how to start the system, execute the Autoprocedure (EPV) command, and program the target
device. Table 15 and Table 16 list the specifications for the series of operations described.
Table 15. Hardware Configuration of DemoKit-LG2
Table 16. Software Configuration of FPL3
Install the FPL3 GUI software on the host machine you are using, by referring to CHAPTER 7
SOFTWARE INSTALLATION (if the software has not been installed yet).
Install the USB driver on the host computer as described in Section 5.2, Software Installation.”
The parameter file for the MCU is automatically stored in <FPL3 install-path>\PRM during FPL3
installation. Nevertheless, the newest version of the parameter file can be downloaded from the NEC
Electronics America web site (http://www.am.necel.com/microcontrollers/devtools.php) and copied into
the <FPL3.EXE-install-path>\PRM subdirectory whenever a new version is available.
Base Board
Target device
Clock
Voltage level
Parameter File
Clock setting
Port
Operation mode
Write HEX
Option setting
µ78F0397D.PRM
6 MHz (multiplied by 1)
COM3 (115200 bps)
Chip
78K0 LCD DEMO.hex
Blank check before Erase
DemoKit-LG2
78K0/LG2 (µPD78F0397D)
6 MHz
5 V