EDK7145 Renesas Electronics America, EDK7145 Datasheet - Page 19

• Manufacturer Part Number: EDK7145
• Description: DEV EVALUATION KIT SH7145
• Manufacturer: Renesas Electronics America
• Type: MCUr

Specifications of EDK7145

• Contents: 2G (Second-generation) Evaluation Board, HEW debugger support, Cable and CD-ROM
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7145
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

so our code runs on until hitting the new breakpoint. This opcode still reflects the source line LED_PORT_DR ^= LED_BIT
and this is illustrated in the source window, as shown below in Figure 7-5.
The CPU peforms 2 instruction-overrun fetches before getting the destination branch at a BT/BF, therefore providing that we
are more than two opcodes away from the BT/BF along the execution path the break should occur as expected. In this
example both MOV.W
however EXTU.W R2, R2 is.
7.2. A
For details on how to use Hitachi Embedded Workshop (HEW), with HMON, `refer to the HEW manual available on the CD
or from the web site.
For information about the SH/7145 series microcontrollers refer to the SH/7144 SH/7145 Series Hardware Manual
For information about the SH/7145 assembly language, refer to the SH2 Series Programming Manual
Further information available for this product can be found on the HMSE web site at:
http://www.hmse.com/products/support.htm
General information on Hitachi Microcontrollers can be found at the following URLs.
Global:
Europe:
DDITIONAL
http://www.hitachisemiconductor.com/
http://www.hmse.com
I
NFORMATION
@(H'00E2:8, PC), R4, and MOV.W @R4, R2 are not suitable locations to place a breakpoint,
F
IGURE
7-5: B
REAKPOINT SOLUTION SOURCE CODE VIEW
19