DEMO9S08JM16 Freescale Semiconductor, DEMO9S08JM16 Datasheet - Page 38

• Manufacturer Part Number: DEMO9S08JM16
• Description: BOARD DEMO FOR JM16 FAMI
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08JM16

• Contents: Board with Daughter card, Cable, Documentation, Mini-AB USB Kit
• Processor To Be Evaluated: MC9S08JM16
• Data Bus Width: 8 bit
• Interface Type: USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: Flexis - S08JM
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08JM16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.8.1
8.9
8.9.1
8.10
8.10.1
8.11
34
IIC Pull-up
Analog Input Potentiometer
Optional Jumpers For Various VDD And VSS
J30 - Buzzer enable jumper BUZ_EN
J31 - IIC Pullup Enable Jumpers IIC_EN
J32 - Potentiometer Output Selection Jumpers POT_EN
Figure 8-23: Potentiometer Output Selection Jumpers POT_EN (J32)
The DEMOJM provides external pull-up resistors for SCL and SDA lines,
enabled by installing the corresponding jumpers on J31. By default both
jumpers are installed.
The DEMOJM provides an easy access 10KOhm potentiometer whose output
may be connected to PTD1 and/or PTB2, selectable by J32, POT_EN.
The DEMOJM provides 5 jumpers, J22 through J26, for different VDD and
VSS connections on the bottom of the board. By default, they are not
Figure 8-21: Buzzer Enable Jumper Settings BUZ_EN (J30)
Figure 8-22: IIC External Pullup Enable IIC_EN (J31)
Enables Buzzer to be controlled by PTF4. This is the default setting.
Enables IIC external pullup. This is the default setting.
Selects the potentiometer output connection. By default they are both
connected.
DEMO9S08JM16 User Manual