DEMO9S08JM16 Freescale Semiconductor, DEMO9S08JM16 Datasheet - Page 22

• Manufacturer Part Number: DEMO9S08JM16
• Description: BOARD DEMO FOR JM16 FAMI
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08JM16

• Contents: Board with Daughter card, Cable, Documentation, Mini-AB USB Kit
• Processor To Be Evaluated: MC9S08JM16
• Data Bus Width: 8 bit
• Interface Type: USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: Flexis - S08JM
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08JM16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 6-4: Accelerometer Demo Application
The data that is graphed may come from either the PC serial port or the virtual
serial port on the DEMOJM board. The serial port of the microcontroller on the
DEMOJM board is routed to the virtual COM port with the setting of jumper
J4. To properly configure accelerometer and potentiometer resources on the
DEMOJM evaluation board, please make sure that these headers are
populated with jumpers in the following manner: J21 (Z/PTB1 -populated, Y/
PTB0 –populated, Y/PTB3 -populated, X/PTD0 –unpopulated); J18 (set to 0);
J19 (set to 0); J20 (set to 1); J32 (PTB2 –populated, PTD1 –populated).
To start using this application, please choose COM or virtual USB COM
settings from the drop-down Port menu. By doing so, you are specifying the
port on the evaluation board that will be used for transmitting captured
accelerometer data via a COM or USB serial port. Please make sure that
jumper J4 is set accordingly. Prior to starting serial data capture, please
specify the Baud setting to reflect the parameter at which your serial
communication interface is operating. Once your port settings are configured,
please plug a USB or DB9 serial cable into the evaluation board and click on
the Open Serial Port and Start Demo buttons. After the serial data is captured
by the application you will see raw data in the Terminal Window. In the
meantime, the Data Snapshot window will display the accelerometer and
potentiometer data levels in the form of a bar graph. The graphing of data can
be paused and the scale of the X and Y axes can be changed via a tool bar
located in the top right corner of the Accelerometer Demo Application.
18
DEMO9S08JM16 User Manual