ST7MDTULS-EVAL STMicroelectronics, ST7MDTULS-EVAL Datasheet - Page 9

• Manufacturer Part Number: ST7MDTULS-EVAL
• Description: BOARD EVALUATION LOW SPEED USB
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of ST7MDTULS-EVAL

• Contents: Board
• Processor To Be Evaluated: ST7262x and ST7263x
• Interface Type: USB
• For Use With/related Products: ST72611, ST7262, ST7263B
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-2903

UM0068
1.4.3
Figure 2.
If you are using the analog trimmer, select the installed ST7 device using jumper W6 as
shown in
devices and to the PB0 port of the ST7263Bxx devices. Any other analog input pin on the
microcontroller can be used by removing the W6 jumper and wiring the center pin of W6 to
the analog input.
The W7 jumper can be used to connect or disconnect an external 12V charge pump in case
you want to program the Flash.
Device selection
Three devices can be used with this board:
ST7263Bxx devices in SDIP32 package on the internal socket
ST7262xxx devices in SDIP42 package on the external socket
Figure
ST7262xxx
Device selection for analog-to-digital conversion
2. This ties the analog trimmer to the PA0 I/O port of the ST7262xxx
W6 jumper
ST7263Bxx
Getting started
7/15