101-0577 Rabbit Semiconductor, 101-0577 Datasheet - Page 16

• Manufacturer Part Number: 101-0577
• Description: KIT DEV FOR BL2500 COYOTE
• Manufacturer: Rabbit Semiconductor
• Series: Coyoter
• Type: Single Board Computers (SBC)r

Specifications of 101-0577

• Contents: SBC, Dev. Board, AC Adapter, Cable and Dynamic C® CD-ROM
• Product: Modules
• Data Bus Width: 10 bit
• Processor Type: Rabbit 3000
• Sram: 128 KB
• Flash: 256 KB
• Number Of I/os: 24
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 8 V to 40 V
• Power Consumption: 1 W
• Board Size: 100 mm x 100 mm x 29 mm
• Description/function: Computer Module
• Interface Type: Ethernet
• For Use With/related Products: BL2510
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2 BL2500 Connections
1. Connect the programming cable to download programs from your PC and to program
Connect the 10-pin
BL2500’s RabbitCore module. Ensure that the colored edge lines up with pin 1 as shown.
There is a small dot on the circuit board next to pin 1 of header J3. (Do not use the
connector, which is used for monitoring only.) Connect the other end of the programming
cable to a COM port on your PC. Make a note of the port to which you connect the cable,
as Dynamic C will need to have this parameter configured. Note that COM1 on the PC is
the default COM port used by Dynamic C.
10
and debug the BL2500.
NOTE: Use only the programming cable that has a red shrink wrap around the RS-232
level converter (Part No. 20-101-0513). If you are using a BL2500 with the optional
10/100Base-T Ethernet interface, you will need the programming cable that has a blue
shrink wrap around the RS-232 level converter (Part No. 20-101-0542). Other Rabbit
programming cables might not be voltage-compatible or their connector sizes may be
different.
PROG
Figure 4. Programming Cable Connections
connector of the programming cable to header J3 on the
Coyote (BL2500)
DIAG