101-0530 Rabbit Semiconductor, 101-0530 Datasheet - Page 17

• Manufacturer Part Number: 101-0530
• Description: KIT TOOL FOR LP3500 INTL
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: Single Board Computers (SBC)r

Specifications of 101-0530

• Contents: Demo Board, Serial Cable, Software and Documentation
• For Use With/related Products: Rabbit 3000-based products, except RCM30/3100, LP3500
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

3. Connect the programming cable to download programs from your PC and to program
Connect the 10-pin
board. Ensure that the colored edge lines up with pin 1 as shown. There is a small dot on the
circuit board next to pin 1 of header J5. (Do not use the
monitoring only.) Connect the other end of the programming cable to a COM port on your
PC. Make a note of the port to which you connect the cable, as Dynamic C will need to
have this parameter configured. Note that COM1 on the PC is the default COM port used
by Dynamic C.
User’s Manual
and debug the LP3500.
NOTE: Use only the programming cable that has a red shrink wrap around the RS-232
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use an
level converter (Part No. 101-0513), which is supplied with the LP3500 Tool Kit. Other
Rabbit programming cables with clear or blue shrink wrap might not be voltage-com-
patible or their connector sizes may be different.
RS-232/USB converter (Part No. 20-151-0178) with the programming cable supplied with
the LP3500 Tool Kit. Note that not all RS-232/USB converters work with Dynamic C.
Figure 4. Programming Cable and Power Supply Connections
PROG
connector of the programming cable to header J5 on the LP3500
DIAG
connector, which is used for
11