101-0359 Rabbit Semiconductor, 101-0359 Datasheet - Page 16

• Manufacturer Part Number: 101-0359
• Description: KIT DEVELOPMENT BASIC RABBIT2000
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0359

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: Rabbit 2000
• Interface Type: RS-232, RS-485
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1003

2.3.2 Connect Programming Cable
The programming cable connects the BL1810 to the PC running Dynamic C to download
programs and to monitor the BL1810 during debugging.
Connect the 10-pin connector of the programming cable labeled
the BL1810 as shown in Figure 3. Be sure to orient the marked (usually red) edge of the
cable towards pin 1 of the connector. (Do not use the
normal serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
12
NOTE: Use only the programming cable that has a red shrink wrap around the RS-232
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
level converter (Z-World part number 101-0513), which is supplied with the Develop-
ment Kit. Other Z-World programming cables might not be voltage-compatible or their
connector sizes may be different.
an RS-232/USB converter with the programming cable supplied with the Rabbit 2000
Development Kit. An RS-232/USB converter is available through the Z-World Web store.
Figure 3. Power and Programming Cable Connections to the BL1810
DIAG
connector, which is used for a
Rabbit 2000 Development Kit
PROG
to header J3 on