101-0359 Rabbit Semiconductor, 101-0359 Datasheet - Page 13
![KIT DEVELOPMENT BASIC RABBIT2000](/photos/9/24/92474/101-0359_sml.jpg)
101-0359
Manufacturer Part Number
101-0359
Description
KIT DEVELOPMENT BASIC RABBIT2000
Manufacturer
Rabbit Semiconductor
Series
RabbitCore 2000r
Type
MPU Moduler
Datasheet
1.101-0359.pdf
(54 pages)
Specifications of 101-0359
Rohs Status
RoHS non-compliant
Contents
RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
Processor To Be Evaluated
Rabbit 2000
Interface Type
RS-232, RS-485
For Use With/related Products
RCM2000, RCM2010, RCM2020
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
316-1003
2.2.1 Prototyping Board Features
•
•
•
•
•
•
Getting Started Manual
Power LED
Board.
Reset Switch
BL1810’s
I/O Switches and LEDs
nected to the PB2–PB5 pins of the Rabbit 2000 microprocessor on the BL1810, and
may be read as inputs by sample applications.
Four LEDs are connected to the PA1–PA4 pins of the of the Rabbit 2000 microproces-
sor on the BL1810, and may be driven as output indicators by sample applications.
Prototyping Area
of through-hole components. Several areas for surface-mount devices are also avail-
able. (Note that there are SMT device pads on both top and bottom of the Prototyping
Board.)
Extension Headers
sets of headers. Developers can solder wires directly into the appropriate holes, or, for
more flexible development, 40-pin header strips can be soldered into place. See
Figure A-1 for the header pinouts.
RS-232
Board. Refer to the Prototyping Board schematic (090-0088) for additional details.
A 10-pin 0.1-inch spacing header strip is installed at J1 to permit connection of a ribbon
cable leading to a standard DE-9 serial connector.
—Two 3-wire or one 5-wire RS-232 serial port are available on the Prototyping
/RESET_IN
—The power LED lights whenever power is connected to the Prototyping
—A momentary-contact, normally open switch is connected directly to the
—A generous prototyping area has been provided for the installation
—The complete pin sets of the BL1810 are duplicated at these two
pin. Pressing the switch forces a hardware reset of the system.
—Four momentary-contact, normally open switches are con-
9