DEMOQE128 Freescale Semiconductor, DEMOQE128 Datasheet - Page 21

• Manufacturer Part Number: DEMOQE128
• Description: DEMO BOARD FOR QE128 FLEXIS
• Manufacturer: Freescale Semiconductor
• Series: Flexis™r
• Type: MCUr

Specifications of DEMOQE128

• Contents: Demo Board, USB Cable, Documentation and Design Files
• Processor To Be Evaluated: MC9S08QE128 and MCF51QE128
• Data Bus Width: 8 bit, 32 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire, HCS08
• Core Sub-architecture: Coldfire V1, HCS08
• Silicon Core Number: MCF51Q, MC9S08
• Rohs Compliant: Yes
• Tool Type: Demonstration Board
• Cpu Core: HCS08
• For Use With/related Products: MC9S08QE128, MCF51QE128
• For Use With: DEMOACEX - BOARD EXPANSION FOR DEMO KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DEMOQE128 User Manual
Change device to 32-bit ColdFire V1:
Run demo on 32-bit ColdFire V1:
9. Click the button labeled PTA2 on the board to enable data filtering,
1. Click “Close Port” in the Accelerometer Demo utility.
2. Close the “True-Time Simulator & Real-Time Debugger” window.
3. Bring the CodeWarrior IDE window to the front with the Accelerome-
4. Open the MCU Change Wizard to switch the project to the 32-bit
5. From the wizard, change the microcontroller selection from the 8-bit
6. Click “Finish.” In the background CodeWarrior will transform your
7. Turn board power switch to OFF.
8. Switch the green 8-bit S08 daughter card with the red 32-bit ColdFire
9. Turn board power switch to ON.
1. Compile the Accelerometer Application and start the process of pro-
2. From the Connection Manager menu, select the “USB1: DEMOQE”
3. From the Loader Warning menu, click on “OK” to allow the debugger
and move the board.
ter Application project for the 8-bit microcontroller.
microcontroller by clicking on the following button in the project panel:
“MC9S08QE128” to the 32-bit “MCF51QE128” in the Flexis>QE Fam-
ily tree.
project to the 32-bit microcontroller with no software changes needed.
V1 daughter card. Make sure to align pin 1 (as marked by arrows) on
daughter card and with pin 1 on the board.
gramming it into the flash of the 32-bit QE128 microcontroller by click-
ing on the debugger launch button shown here :
port and click on “Connect (Reset).”
17