C8051F064EK Silicon Laboratories Inc, C8051F064EK Datasheet - Page 189

• Manufacturer Part Number: C8051F064EK
• Description: KIT EVAL FOR C8051F064
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F064EK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F06x
• Interface Type: USB
• Silicon Manufacturer: Silicon Labs
• Core Architecture: 8051
• Silicon Core Number: C8051F064
• Silicon Family Name: C8051F06x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F064
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1219

Bits7-0:
Bits7-6:
Bit5:
Bit4:
Bits3-2:
Bits1-0:
PGSEL7
R/W
R/W
Bit7
Bit7
-
PGSEL[7:0]: XRAM Page Select Bits.
The XRAM Page Select Bits provide the high byte of the 16-bit external data memory
address when using an 8-bit MOVX command, effectively selecting a 256-byte page of
RAM.
0x00: 0x0000 to 0x00FF
0x01: 0x0100 to 0x01FF
...
0xFE: 0xFE00 to 0xFEFF
0xFF: 0xFF00 to 0xFFFF
Unused. Read = 00b. Write = don’t care.
PRTSEL: EMIF Port Select.
0: EMIF not mapped to port pins.
1: EMIF active on P4-P7.
EMD2: EMIF Multiplex Mode Select.
0: EMIF operates in multiplexed address/data mode.
1: EMIF operates in non-multiplexed mode (separate address and data pins).
EMD1-0: EMIF Operating Mode Select.
These bits control the operating mode of the External Memory Interface.
00: Internal Only: MOVX accesses on-chip XRAM only. All effective addresses alias to on-chip
memory space.
01: Split Mode without Bank Select: Accesses below the 4 kB boundary are directed on-chip.
Accesses above the 4 kB boundary are directed off-chip. 8-bit off-chip MOVX operations use the
current contents of the Address High port latches to resolve upper address byte. Note that in
order to access off-chip space, EMI0CN must be set to a page that is not contained in the on-chip
address space.
10: Split Mode with Bank Select: Accesses below the 4 kB boundary are directed on-chip.
Accesses above the 4 kB boundary are directed off-chip. 8-bit off-chip MOVX operations use the
contents of EMI0CN to determine the high-byte of the address.
11: External Only: MOVX accesses off-chip XRAM only. On-chip XRAM is not visible to the CPU.
EALE1-0: ALE Pulse-Width Select Bits (only has effect when EMD2 = 0).
00: ALE high and ALE low pulse width = 1 SYSCLK cycle.
01: ALE high and ALE low pulse width = 2 SYSCLK cycles.
10: ALE high and ALE low pulse width = 3 SYSCLK cycles.
11: ALE high and ALE low pulse width = 4 SYSCLK cycles.
PGSEL6
R/W
R/W
Bit6
Bit6
-
Figure 17.1. EMI0CN: External Memory Interface Control
Figure 17.2. EMI0CF: External Memory Configuration
PGSEL5
PRTSEL
R/W
R/W
Bit5
Bit5
PGSEL4
EMD2
R/W
R/W
Bit4
Bit4
PGSEL3
Rev. 1.2
EMD1
R/W
R/W
Bit3
Bit3
C8051F060/1/2/3/4/5/6/7
PGSEL2
EMD0
R/W
R/W
Bit2
Bit2
PGSEL1
EALE1
R/W
R/W
Bit1
Bit1
SFR Address:
SFR Address:
SFR Page:
PGSEL0
EALE0
SFR Page:
R/W
R/W
Bit0
Bit0
0xA3
0
0xA2
0
Reset Value
Reset Value
00000000
00000011
189