DEMO9S08QE8 Freescale Semiconductor, DEMO9S08QE8 Datasheet - Page 29

• Manufacturer Part Number: DEMO9S08QE8
• Description: BOARD DEMO FOR MC9S08Q
• Manufacturer: Freescale Semiconductor
• Series: Flexis™r
• Type: MCUr

Specifications of DEMO9S08QE8

• Contents: Demo Board
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: Flexis - S08QE
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08QE8
• For Use With: DEMOACEX - BOARD EXPANSION FOR DEMO KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.5
7.5.1
DEMO9S08QE8 User Manual
3-Axis Accelerometer Jumper Settings
RESET_EN
J13 - Accelerometer g-Select1 Jumper G-SEL1
The DEMO9S08QE8 integrates a 3-axis accelerometer. Its enable or disable,
sensitivity levels, and output signal connections are all jumper settable.
Jumpers J13, J14, J15 and J16 are associated with the accelerometer.
Figure 7-10: Reset Switch and Reset LED enable Jumper (J18)
G-SEL2
0
0
1
1
TABLE 1.
Enables the Reset Switch and the Reset LED Display. Each jumper
may be individually installed or removed. This is the default setting.
Selects g-Select1 to be logic low. This is the default setting.
Selects g-Select1 to be logic high. A user may control PTD0 in
firmware to set g-Select1.
Accelerometer G-Select Pin Descriptions
G-SEL1
0
1
0
1
g-Range
1.5g
2g
4g
6g
Sensitivity
800 mV/g
600 mV/g
300 mV/g
200 mV/g
25