DEMO9S08QE8 Freescale Semiconductor, DEMO9S08QE8 Datasheet - Page 28

• Manufacturer Part Number: DEMO9S08QE8
• Description: BOARD DEMO FOR MC9S08Q
• Manufacturer: Freescale Semiconductor
• Series: Flexis™r
• Type: MCUr

Specifications of DEMO9S08QE8

• Contents: Demo Board
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: Flexis - S08QE
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08QE8
• For Use With: DEMOACEX - BOARD EXPANSION FOR DEMO KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.4.1
7.4.2
7.4.3
24
Figure 7-8: Jumper Settings for Input Signals to P&E’s Embedded Multilink, P&E
Note:
Figure 7-9: Jumper Settings for Light Touch Switches KEY_ENABLE (J12)
J11 - P&E’s Logic Analyzer Inputs IN0/IN1
J12 - Light Touch Switch Enable Jumper KEY_ENABLE
J18 - Reset Switch Enable and Reset LED Display Enable Jumper
The logic analyzer inputs are marked on one side of the J11 jumper. The
inputs allow P&E’s PC-based logic analyzer application to display these
signals in real-time.
PTD2 and PTD3 have no effect on QE8 devices.
By installing both jumpers, the logic analyzer pins IN0 and IN1 will be
connected to PTC0 and PTC1 respectively.
By removing these jumpers IN0 and IN1 will be unconnected. The
user may connect these signals, via wires, to any other signals on the
processor which they wish to view on the PC.
Enables the corresponding switch. Each jumper may be individually
installed or removed. By default, all jumpers are installed to enable all
the switches.
INPUT_EN (J11)
DEMO9S08QE8 User Manual