STM32CMICOS-EVAL STMicroelectronics, STM32CMICOS-EVAL Datasheet - Page 6

• Manufacturer Part Number: STM32CMICOS-EVAL
• Description: EVAL BOARD
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STM32CMICOS-EVAL

• Contents: Board
• Tool Type: Development Software Support
• Core Architecture: ARM
• Operating Supply Voltage: 3.3 V
• For Use With/related Products: STM32F107
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10064

Configuration
2
2.1
Note:
2.2
6/27
1
2
3
Configuration
Power supply
The STM32-MICRIUM evaluation board is powered by a 5V DC power supply. It is
configured via JP5 to use the following power supply sources:
Table 1.
The board cannot be powered by VBUS on CN8 when USB-OTG is used as a USB device.
The LED LD5 is lit when the STM32CMICOS-EVAL board is powered by the 5V correctly.
Three test points TP4 (5V), TP3 (GND), and TP2 (3.3V) are available on the top right of the
board to check power supply.
Boot options
The boot option is configured by setting switch JP3 (BOOT1) and JP4 (BOOT0). The
STM32-MICRIUM evaluation board can boot from:
Table 2.
JP5
JP3 &
JP4
Jumper
Jumper
5V DC power adapter connected to CN10, the power screw terminal on the board.
5V VBUS power (500 mA limitation from CN5), the mini-B USB of embedded J-Link.
Embedded user Flash.
System memory.
Embedded SRAM for debugging.
The board is powered by VBUS of the embedded J-Link input CN5
when JP5 is set as shown on the right: (Default setting).
The board is powered by 5V DC input CN10 when JP5 is set as shown
on the right:
STM32-MICRIUM evaluation board boots from user Flash when JP4 is
set as shown to the right. JP3 is not relevant in this configuration.
(Default setting).
STM32-MICRIUM evaluation board boots from embedded SRAM when
JP3 and JP4 are set as shown to the right.
STM32-MICRIUM evaluation board boots from system memory when
JP3 and JP4 are set as shown to the right.
STM32-MICRIUM evaluation board power supply jumper
STM32-MICRIUM evaluation board boot options jumpers
Doc ID 16173 Rev 2
Description
Description
STM32-MICRIUM
Configuration
configuration
0 <_> 1
0 <_> 1
0 <_> 1
3 2 1
3 2 1
Switch