SOT23-5EV-VREG Microchip Technology, SOT23-5EV-VREG Datasheet - Page 13

• Manufacturer Part Number: SOT23-5EV-VREG
• Description: EVAL BOARD SOT23-5 VOLTAGE REG
• Manufacturer: Microchip Technology

Specifications of SOT23-5EV-VREG

• Channels Per Ic: 1 - Single
• Regulator Type: Positive Fixed & Adjustable
• Board Type: Partially Populated
• Utilized Ic / Part: SOT-23-5 Package
• Silicon Manufacturer: Microchip
• Application Sub Type: Voltage Regulator
• Kit Application Type: Power Management - Voltage Regulator
• Silicon Core Number: MCP1801, MCP1802, TC1014/1015/1185
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output: -
• Voltage - Output: -
• Voltage - Input: -
• Operating Temperature: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2.1
2.2
© 2009 Microchip Technology Inc.
INTRODUCTION
FEATURES
Chapter 2. Installation and Operation
The SOT23-5 Voltage Regulator Evaluation Board is designed to be used to facilitate
the evaluation of Microchip’s voltage regulators, or to be used as a standalone voltage
regulator board. Jumpers have been placed on the board to facilitate testing of specific
voltage regulator parameters. The jumpers may also be used to select pull-up and pull-
down voltage levels.
The SOT23-5 Voltage Regulator Evaluation Board kit comes with a 1 uF ceramic input
and output capacitor soldered to the board. A 10K resistor in series with the SHDN pin
is also populated on the board. The PWRGD/ADJ pin has a 69.8 kΩ resistor soldered
to the board. The board has three more unpopulated resistor locations that may be
used for loads and voltage adjustments. The board also has an unpopulated location
that may be used for bypass capacitance.
The SOT23-5 Voltage Regulator Evaluation Board has the following features:
• Input and Output headers for future connection to Line Step and Load Step
• Ample testpoints to attach multimeters, power supplies, and loads
• Jumper to select ground current measurement
• Jumper to select load resistor
• Jumper to select shutdown pin input: V
• Jumper to connect input capacitor to circuit
• SMT0805 PCB footprints for user Power Good pull-up resistor
• SMT0805 PCB footprints for user Adjustable Voltage resistor divider
• SMT0805 PCB footprints for user Bypass Capacitor
modules
EVALUATION BOARD USER’S GUIDE
SOT23-5 VOLTAGE REGULATOR
DD
, GND, or use testpoint
DS51811A-page 9