SI3461-KIT Silicon Laboratories Inc, SI3461-KIT Datasheet - Page 17

• Manufacturer Part Number: SI3461-KIT
• Description: BOARD EVAL FOR SI3461
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of SI3461-KIT

• Main Purpose: Special Purpose DC/DC, Power Over Ethernet
• Board Type: Fully Populated
• Utilized Ic / Part: Si3461
• Ethernet Connection Type: 10/100 Base-T, IEEE 802.3
• Interface Type: Ethernet
• Operating Voltage: 12 V to 15 V
• Operating Current: 10 mA
• Product: Modules
• For Use With/related Products: Si3460
• Lead Free Status / RoHS Status: Lead free / RoHS non-compliant
• Current - Output: -
• Voltage - Output: -
• Voltage - Input: -
• Power - Output: -
• Frequency - Switching: -
• Outputs And Type: -
• Regulator Topology: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1843

Pin #
10
11
Pin Name
STATUS
GND
Analog in/Digital out
Pin Type
Table 7. Si3461 Pin Functionality (Continued)
GND
At power-up, the voltage on this pin is sensed to configure the
PSE available power, mid span/end span timing mode and the
device's restart behavior when a fault condition is detected. Refer
to "4.2. Operating Mode Configuration" on page 12.
After reading the voltage present at this pin at power-up, the
STATUS pin becomes a digital output used to control an external
LED, which indicates when a detect, power good, or output fault
condition has occurred. Logic high turns the LED on, and logic low
turns the LED off. Refer to "5.7. Status LED Function" on page 14.
Ground connection for the Si3461.
Rev. 1.0
Pin Function
Si3461
17