MCP1631RD-MCC1 Microchip Technology, MCP1631RD-MCC1 Datasheet - Page 95

• Manufacturer Part Number: MCP1631RD-MCC1
• Description: REFERENCE DESIGN FOR MCP1631HV
• Manufacturer: Microchip Technology
• Type: Battery Managementr

Specifications of MCP1631RD-MCC1

• Main Purpose: Power Management, Battery Charger
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP1631HV, PIC16F883
• Primary Attributes: 1 ~ 2 Cell- Li-Ion, 1 ~ 4 Cell- NiCd/NiMH
• Secondary Attributes: Status LEDs
• Supported Devices: MCP1631HV, PIC16F883 Device Type
• Tool / Board Applications: Power Management-Battery Management
• Development Tool Type: Reference Design
• Input Voltage: 5.5 V to 16 V
• Product: Power Management Modules
• Mcu Supported Families: MCP1631HV/PIC16F883 Family
• Silicon Manufacturer: Microchip
• Silicon Core Number: MCP1631HV
• Kit Application Type: Reference Design
• Application Sub Type: Battery Charger
• Kit Contents: Board Only
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MCP1631HV, PIC16F883
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 8-4:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
R/W-0
SR1
2:
(2)
The CxOUT bit in the CMxCON0 register will always reflect the actual comparator output (not the level on
the pin), regardless of the SR latch operation.
To enable an SR Latch output to the pin, the appropriate CxOE and TRIS bits must be properly
configured.
SR1: SR Latch Configuration bit
1 =
0 =
SR0: SR Latch Configuration bits
1 =
0 =
C1SEN: C1 Set Enable bit
1 = C1 comparator output sets SR latch
0 = C1 comparator output has no effect on SR latch
C2REN: C2 Reset Enable bit
1 = C2 comparator output resets SR latch
0 = C2 comparator output has no effect on SR latch
PULSS: Pulse the SET Input of the SR Latch bit
1 = Triggers pulse generator to set SR latch. Bit is immediately reset by hardware.
0 = Does not trigger pulse generator
PULSR: Pulse the Reset Input of the SR Latch bit
1 = Triggers pulse generator to reset SR latch. Bit is immediately reset by hardware.
0 = Does not trigger pulse generator
Unimplemented: Read as ‘0’
FVREN: Fixed Voltage Reference Enable bit
1 = 0.6V Reference FROM INTOSC LDO is enabled
0 = 0.6V Reference FROM INTOSC LDO is disabled
SR0
R/W-0
C2OUT pin is the latch Q output
C2OUT pin is the C2 comparator output
C1OUT pin is the latch Q output
C1OUT pin is the C1 Comparator output
SRCON: SR LATCH CONTROL REGISTER
(2)
W = Writable bit
‘1’ = Bit is set
C1SEN
R/W-0
PIC16F882/883/884/886/887
C2REN
(2)
R/W-0
(2)
S = Bit is set only -
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PULSS
R/S-0
PULSR
R/S-0
x = Bit is unknown
U-0
—
DS41291F-page 93
FVREN
R/W-0
bit 0