20-151-0178 Rabbit Semiconductor, 20-151-0178 Datasheet - Page 9

• Manufacturer Part Number: 20-151-0178
• Description: CABLE CONVERTER RS-232 TO USB
• Manufacturer: Rabbit Semiconductor

Specifications of 20-151-0178

• Accessory Type: USB to RS232 Adapter
• Product: Microcontroller Accessories
• For Use With/related Products: Rabbit-based Boards
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-151-0178; 316-1181

1.3 RabbitFLEX Tool Kit
The RabbitFLEX Tool Kit contains the software and the extra hardware needed to develop your applica-
tion. This section lists the tool kit items.
Tool Kit Items
1.4 CE Compliance
Equipment is generally divided into two classes.
These limits apply over the range of 30 to 230 MHz. The limits are 7 dB higher for frequencies above 230
MHz. Although the test range goes to 1 GHz, the emissions from Rabbit-based systems at frequencies
above 300 MHz are generally well below background noise levels.
The RabbitFlex single-board computer has been tested and was found to be in confor-
mity with the following applicable immunity and emission standards. Boards that are
CE-compliant have the CE mark.
RabbitFLEX User’s Manual
•
•
•
•
•
•
•
•
•
Digital equipment meant for light industrial use Digital equipment meant for home use
Less restrictive emissions requirement:
less than 40 dB µV/m at 10 m
(40 dB relative to 1 µV/m) or 300 µV/m
tinental Europe is included with kits sold overseas.
manual: the RabbitFLEX BL300F User’s Manual.
RabbitFLEX BL300F Getting Started Instructions.
Programming cable, 10-pin header to DB9 connector with integrated level-matching circuitry.
48 V AC, 800 mA center-tapped transformer. A transformer compatible with power outlets in con-
CD, containing Dynamic C 9.41 (or later) with complete product documentation, including this
Demonstration board with pushbutton switches and LEDs.
Cable assemblies to access connectors on RabbitFLEX BL300F.
Hardware bag containing mounting standoffs and screws, female DB9 connector.
Rabbit 3000 Processor Easy Reference poster.
Registration card.
NOTE: Earlier versions of the RabbitFlex boards that do not have the
CE mark are not CE-compliant.
CLASS A
www.rabbit.com
More restrictive emissions requirement:
30 dB µV/m at 10 m or 100 µV/m
CLASS B
3