20-151-0178 Rabbit Semiconductor, 20-151-0178 Datasheet - Page 145

• Manufacturer Part Number: 20-151-0178
• Description: CABLE CONVERTER RS-232 TO USB
• Manufacturer: Rabbit Semiconductor

Specifications of 20-151-0178

• Accessory Type: USB to RS232 Adapter
• Product: Microcontroller Accessories
• For Use With/related Products: Rabbit-based Boards
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-151-0178; 316-1181

C.1.3 Digital Output Connections
To run the digital output sample programs, you must connect at least one demo board LED to a 100 mA
sinking driver on the RabbitFLEX board. There are four demo board LEDs, so you may connect up to four
100 mA sinking drivers.
Connect the green wire of the cable assembly that corresponds to the selected digital output to LED1,
LED2, LED3 or LED4 on screw terminal header J1 on the demo board. Connect the polarized connector
of the cable assembly to the connector that has the digital output(s) you selected on the RabbitFLEX
board.
this case, the polarized connector of the cable assembly should be connected to one of the connectors on
the RabbitFLEX SBC40 that has 100 mA sinking drivers on pins 2, 4, 6 and 8.
RabbitFLEX User’s Manual
Figure C.2
Figure C.3 Demo Board Connected to Pins 2, 4, 6, 8 on Cable Assembly
shows the demo board LEDs connected to pins 2, 4, 6 and 8 of the cable assembly. In
· ·
· ·
· ·
www.rabbit.com
139