FPS100048 TDK Corporation, FPS100048 Datasheet - Page 52

• Manufacturer Part Number: FPS100048
• Description: PWR SUP FNT END 48V 1008W 21A
• Manufacturer: TDK Corporation
• Series: FPSr
• Type: Commercialr

Specifications of FPS100048

• Power Supply Type: Switching (Closed Frame)
• Voltage - Output: 48V
• Number Of Outputs: 1
• Power (watts): 1000W
• Applications: Commercial
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 48 VDC @ 21A
• Size / Dimension: 1.61" L x 5" W x 11.4" H (40.9mm x 127mm x 289.6mm)
• Power (watts) - Rated: 1008W
• Operating Temperature: 0°C ~ 70°C
• Efficiency: 88%
• Approvals: CE, EN, UL
• Line Regulation: 0.4%
• Load Regulation: 0.8%
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 48V
• Output Current: 21A
• Power Rating: 1kW
• Input Voltage: 85V AC To 265V AC / 120V DC To 360V DC
• Maximum Output Current: 21 A
• Maximum Output Power: 1008 W
• Input Frequency: 47 to 63 Hz
• Brand/series: FPS1000 Series
• Configuration: Enclosed
• Operation: Linear
• Output: 48 VDC @ 21 A
• Power, Output: 1008 W
• Primary Type: AC-DC
• Special Features: High Efficiency, Hot Swappable, PFC, Remote On/Off, Remote Sense
• Voltage, Input: 85 to 265/120 to 360 VAC/VDC
• Voltage, Output: 48 VDC
• Output Current (max): 21A
• Screening Level: Commercial
• Product Depth (mm): 127mm
• Operating Temperature Min Deg. C: 0C
• Operating Temperature Max Deg. C: 70C
• Mounting Style: Screw
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1239

CHAPTER 20 PARALLEL AND SERIES OPERATION
20.1 Parallel operation
Up to 3 x FPS-T1U racks with up to 8 x FPS1000 installed units of the same output voltage rating can be connected
in parallel. The built-in Oring diodes on the main output and on the +12V auxiliary voltage in each FPS1000 unit
allow N+1 operation. By connecting the CS signal between the paralleled units, automatic current balance is achieved,
with +/-10% accuracy. For input voltages less than 100Vac, maximum output Power derated by 10% of the Power
rating. Refer to Fig 20-1 for output Power derating in parallel operation.
Fig 20-1
20.1.1 Parallel operation with Remote sensing
Fig 20-2 shows typical connection of parallel operation with Remote sensing. The CS signal wires should be as short
aspossible and with the same length.
% of rated Power
Fig 20-2 Parallel operation with Remote sensing
CS
CS
CS
100
90
OFF_1
FPS-1000 Module A
FPS-1000 Module B
FPS-1000 Module C
ON/
FPS-T1U
A
85
OFF_1
ON/
B
100
OFF_1
ON/
C
+V
+S
+V
+S
+V
+S
-S
-V
-S
-V
-S
-V
+S
+S
-S
-S
+S
-S
265
49
+S
-S
+V
Input voltage
(Vrms)
-V
LOAD
FPS-T1U Instruction Manual