ZWS150PAF24 TDK Corporation, ZWS150PAF24 Datasheet - Page 6

• Manufacturer Part Number: ZWS150PAF24
• Description: PWR SUP 24V 151.2W 6.3A
• Manufacturer: TDK Corporation
• Series: ZWSr

Specifications of ZWS150PAF24

• Voltage - Output: 24V
• Number Of Outputs: 1
• Power (watts): 150W
• Applications: Commercial
• Power Supply Type: Switching (Open Frame)
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 24 VDC @ 6.3A
• Size / Dimension: 8.19" L x 3.15" W x 1.46" H (208mm x 80mm x 37mm)
• Power (watts) - Rated: 151.2W
• Operating Temperature: -10°C ~ 70°C
• Efficiency: 82%
• Approvals: CE, CSA, EN, UL
• Line Regulation: 0.4%
• Load Regulation: 0.8%
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Other names: 285-1711

2. Terminal Connecting Method
•
•
•
•
•
•
•
ZWS150PAF
ZWS150PAF/J
Pay attention to the input wiring. If it is connected to
wrong terminal, the power supply will be damaged.
Input must be off when making connections.
Connect FG terminal of input connector and mount-
able FG to ground terminal of the equipment.
Output current of each connector pin must be less
than 5A. ( Except /T, /S models which M4 screw is
used. )
The output load line and input line shall be separated
and twisted to improve noise sensitivity.
Remote ON/OFF control lines shall be twisted or use
shielded wire.
Use the input/output connector housing, terminal pin
as specified in outline drawing. Also, use recom-
mended crimping tool.
Connector housing and terminal pin is not included
with this product.
When connecting or removing connector, do not ap-
ply stress to PCB.
- 5 -
DENSEI-LAMBDA
ZWS150PAF Series
INSTRUCTION MANUAL