CC30-2405SFH-E TDK Corporation, CC30-2405SFH-E Datasheet - Page 2

• Manufacturer Part Number: CC30-2405SFH-E
• Description: CONV DC/DC 24V 5V 6A 30W PCB
• Manufacturer: TDK Corporation
• Series: CC-P-Er
• Type: Isolatedr

Specifications of CC30-2405SFH-E

• Output: 5V
• Number Of Outputs: 1
• Power (watts): 30W
• Mounting Type: Through Hole
• Voltage - Input: 24V
• Package / Case: 20-DIP Module (17 Leads)
• 1st Output: 5 VDC @ 6A
• Size / Dimension: 1.51" L x 1.32" W x 0.33" H (38.4mm x 33.5mm x 8.3mm)
• Power (watts) - Rated: 30W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 89%
• Approvals: CSA, cUL, EN, UL
• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 18V To 36V
• Power Rating: 30W
• Output Voltage: 5V
• Output Current: 6A
• Approval Bodies: CULus, CSA
• Supply Voltage: 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

3. Inp
3. Input / Output Line Connection
3-1 Fuse
Because there is no built-in fuse, use an external fuse in accordance with Table 3-1.
In addition, when supplying input voltage from one DC power supply to multiple DC/DC converters,
attach a fast breaking fuse to the input of each converter upon use.
3-2 Input Side External Capacitor
This converter is equipped with a capacitor on the input side and does not need an external capacitor to be attached to the input
terminal side when the length of the line connection from the DC power source is short (less than 1 meter is estimated).
However, when the line to the input terminal is long, or when the inductance increases, operation may become unstable, therefore
insert external capacitor Cin between the +Vin and –Vin terminals.
※Contact TDK-Lambda concerning items not mentioned or items which are not clear.
3. Inp
3. Inp
Put the fuse on the +Vin side when the –Vin side is used for GND, and on the -Vin side when the +Vin side is used for GND.
When a fuse breaks, the Alarm Signal does not operate.
ut / Output Line Connection
ut / Output Line Connection
ut / Output Line Connection
Recommended Cin Value
Recommended Cin Value
Fig. 3-2-1 Cin is necessary when an inductance filter is inserted in the input line.
Converter Type
Converter Type
Converter Type
Converter Type
Fuse Capacity
Fuse Capacity
Input
Input
DC
DC
Table 3-2 Recommended External Capacitor Cin Values
Fig. 3-2-2 Cin is necessary when the input line is long.
Fuse
Table 3-1
Lin
CC15-24xxSxx-E
CC15-48xxSxx-E
CC15-24xxSxx-E
CC15-48xxSxx-E
Recommended Fuse Capacity
33μF
10μF
2A
1A
Fuse
Cin
Cin
+Vin
-Vin
+Vin
-Vin
CC30-24xxSxx-E
CC30-48xxSxx-E
CC30-24xxSxx-E
CC30-48xxSxx-E
68μF
22μF
4A
2A