AFCT-5745PZ Avago Technologies US Inc., AFCT-5745PZ Datasheet - Page 17
![TXRX SFF SONET OC48 BAIL SR](/photos/22/52/225249/4532983_sml.jpg)
AFCT-5745PZ
Manufacturer Part Number
AFCT-5745PZ
Description
TXRX SFF SONET OC48 BAIL SR
Manufacturer
Avago Technologies US Inc.
Series
METRAKr
Datasheet
1.AFCT-5745PZ.pdf
(18 pages)
Specifications of AFCT-5745PZ
Applications
General Purpose
Data Rate
2.7Gbps
Wavelength
1300nm
Voltage - Supply
3.1 V ~ 3.5 V
Connector Type
LC Duplex
Mounting Type
SFP
Data Rate Max
2.75Gbps
Supply Voltage
3.3V
Wavelength Typ
1300nm
Operating Temperature Min
10°C
Operating Temperature Max
85°C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Application Information
The Applications Engineering Group at Avago is available
to assist you with technical understanding and design
trade-offs associated with these transceivers. You can
contact them through your Avago sales representative.
The following information is provided to answer some of
the most common questions about the use of parts.
Optical Power Budget
The worst-case Optical Power Budget (OPB) in dB for a
fiber-optic link is determined by the difference between
the minimum transmitter output optical power (dBm
avg) and the lowest receiversensitivity (dBm avg). This
OPB provides the necessary optical signal range to es-
tablish a working fiber-optic link. The OPB is allocated
for the fiber-optic cable length and the corresponding
link penalties. For proper link performance, all penalties
that affect the link performance must be accounted for
within the link optical power budget.
Process Plug
This transceiver is supplied with a process plug for pro-
tection of the optical port within the LC connector recep-
tacle. This process plug prevents contamination during
standard process handling, shipping and storage.
LC SFP Cleaning Recommendations
In the event of contamination of the optical ports, the
recommended cleaning process is the use of forced nitro-
gen. If contamination is thought to have remained, the
optical ports can be cleaned using a NTT international
Cletop stick type (diam. 1.25 mm) and HFE7100 cleaning
fluid.
Customer Manufacturing Processes
This module is pluggable and is not designed for aque-
ous wash, IR reflow or wave soldering processes.
17
Caution
There are no user serviceable parts nor any maintenance
required for the AFCT-5745Z. Tampering with or modi-
fying the performance of the AFCT-5745Z will result in
voided product warranty. It may also result in improper
operation of the AFCT-5745Z circuitry, and possible over-
stress of the laser source. Device degradation or product
failure may result. Connection of the AFCT-5745Z to a
non-approved optical source, operating above the rec-
ommended absolute maximum conditions or operating
the AFCT-5745Z in a manner inconsistent with its design
and function may result in hazardous radiation exposure
and may be considered an act of modifying or manufac-
turing a laser product. The person(s) performing such an
act are required by law to re-certify and re-identify the
laser product under the provisions of U.S. 21 CFR (Sub-
chapter J) and the TUV.