AFCT-5815CZ Avago Technologies US Inc., AFCT-5815CZ Datasheet - Page 4

• Manufacturer Part Number: AFCT-5815CZ
• Description: TXRX OPT SM 155MBS SONET OC3/SDH
• Manufacturer: Avago Technologies US Inc.

Specifications of AFCT-5815CZ

• Applications: General Purpose
• Data Rate: 155Mbps
• Wavelength: 1300nm
• Voltage - Supply: *
• Connector Type: SC
• Mounting Type: Through Hole
• Data Rate Max: 0.155Gbps
• Supply Voltage: 5V
• Wavelength Typ: 1300nm
• Leaded Process Compatible: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Evaluation Circuit Boards
Evaluation circuit boards are available from
Avago Technologies Application Engineering staff.
Contact your local Avago Technologies sales
representative to arrange for access to one if
needed.
Recommended Solder and Wash Process
The AFCT-5815xZ is compatible with industry
standard wave or hand solder processes.
A drying cycle must be completed after wash
process to remove all moisture from the module.
AFCT-5815xZ Process Plug
The AFCT-5815xZ transceiver is supplied with
a process plug for protection of the optical
ports with the Duplex SC connector receptacle.
This process plug prevents contamination during
wave solder and aqueous rinse as well as
during handling, shipping or storage. Each
process plug can only be used once during
processing, although with subsequent use, it
can be used as a dust cover. It is made of
high-temperature, molded, sealing material that
will withstand +85°C and a rinse pressure of
110 lb/in
Figure 4. Recommended Board Layout Hole Pattern
(0.800)
4
20.32
(0.100)
2.54
2
.
(0.800)
TOP VIEW
20.32
DIMENSIONS ARE IN MILLIMETERS (INCHES)
(0.075 ± 0.004)
2 x Ø 1.9 ± 0.1
(0.032 ± 0.004)
9 x Ø 0.8 ± 0.1
Recommended Solder Fluxes
and Cleaning/Degreasing
Chemicals
Solder fluxes used with the AFCT-5815xZ
fiber-optic transceiver should be water-soluble,
organic solder fluxes. Some recommended solder
fluxes are Lonco 3355-11 from London Chemical
West, Inc. of Burbank, CA, and 100 Flux from
Alpha Metals of Jersey City, NJ.
Recommended cleaning and degreasing chemicals
for the AFCT-5815xZ are alcohol’s (methyl,
isopropyl, isobutyl), aliphatics (hexane, heptane)
and other chemicals, such as soap solution or
naphtha. Do not use partially halogenated
hydrocarbons for cleaning/degreasing. Examples
of chemicals to avoid are 1.1.1. trichloroethane,
ketones (such as MEK), acetone, chloroform,
ethyl acetate, methylene dichloride, phenol,
methylene chloride or N-methylpyrrolidone.