AFCT-5710PZ Avago Technologies US Inc., AFCT-5710PZ Datasheet - Page 5

• Manufacturer Part Number: AFCT-5710PZ
• Description: TXRX OPT SFF PLUGGABLE BAIL
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of AFCT-5710PZ

• Data Rate: 1.25Gbd
• Wavelength: 1310nm
• Applications: Ethernet
• Voltage - Supply: 3.14 V ~ 3.47 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Function: SFP Optical Transceivers with Optional DMI for Gigabit Ethernet 1.25 GBd. Intended for premise, public and access networking applications.
• Product: Transceiver
• Maximum Rise Time: 0.26 ns/0.4 ns
• Maximum Fall Time: 0.26 ns/0.4 ns
• Pulse Width Distortion: 0.227 ns (Max)/0.267 ns (Max)
• Operating Supply Voltage: 3.14 V to 3.47 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 10 C
• Package / Case: SFP
• Optical Fiber Type: TX/RX
• Data Transfer Rate: 1250MBd
• Optical Rise Time: 0.26/0.4ns
• Optical Fall Time: 0.26/0.4ns
• Jitter: 0.227/0.267ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 1355nm
• Package Type: SFP
• Operating Supply Voltage (min): 3.14V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.47V
• Operating Temp Range: -10C to 85C
• Mounting: Snap Fit To Panel
• Pin Count: 20
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Singlemode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Compliance Prediction
The real-time diagnostic parameters can be monitored
to alert the system when operating limits are exceeded
and compliance cannot be ensured.
Fault Isolation
The diagnostic information can allow the host to
pinpoint the location of a link problem and accelerate
system servicing and minimize downtime.
Component Monitoring
As part of the host system monitoring, the real time
diagnostic information can be combined with system
level monitoring to ensure system reliability.
Application Support
An Evaluation Kit and Reference Designs are available
to assist in evaluation of the AFCT-571 Z SFPs. Please
contact your local Field Sales representative for avail-
ability and ordering details.
Table 1. Regulatory Compliance
5
Feature
Electrostatic Discharge (ESD)
to the Electrical Pins
Electrostatic Discharge (ESD)
to the Duplex LC Receptacle
Electromagnetic Interference
(EMI)
Immunity
Eye Safety
Component Recognition
ROHS Compliance
Test Method
MIL-STD-883C Method 3015.4
JEDEC/EIA JESD22-A114-A
Bellcore GR1089-CORE
FCC Class B
Variation of IEC 61000-4-3
US FDA CDRH AEL Class 1
EN (IEC) 60825-1, 2,
EN60950 Class 1
Underwriter’s Laboratories and
Canadian Standards Association Joint
Component Recognition for Informa-
tion Technology Equipment Including
Electrical Business Equipment
Operating Temperature
The AFCT-571 Z family is available in either Extended
(-10 to +85°C) or Industrial (-40 to +85°C) temperature
ranges.
Power Supply Noise
The AFCT-571 Z can withstand an injection of PSN on
the V
mask margin of up to 10% on the transmitter and a 1
dB sensitivity penalty on the receiver. This occurs when
the product is used in conjunction with the MSA rec-
ommended power supply filter shown in Figure 3.
Regulatory Compliance
The transceiver regulatory compliance is provided in
Table 1 as a figure of merit to assist the designer. The
overall equipment design will determine the certifica-
tion level.
CC
lines of 100 mV ac with a degradation in eye
25 kV Air Discharge
Applications with high SFP port counts are ex-
No measurable effect from a 10 V/m field swept
Performance
Class 2 (>2000 Volts)
10 Zaps at 8 kV (contact discharge) on the electri-
cal faceplate on panel.
pected to be compliant; however, margins are de-
pendent on customer board and chassis design.
from 80 to 1000 MHz applied to the transceiver
without a chassis enclosure.
CDRH certification # 9521220-132
TUV file 933/21201880/12
UL file # E173874
Less than 1000ppm of: cadmium, lead, mercury,
hexavalent chromium, polybrominated biphenyls,
and polybrominated biphenyl ethers