NHD-0416B1Z-FSPG-YBW-L-3V Newhaven Display, NHD-0416B1Z-FSPG-YBW-L-3V Datasheet - Page 20

• Manufacturer Part Number: NHD-0416B1Z-FSPG-YBW-L-3V
• Description: LCD MOD CHAR 4X16 Y/G TRANSFL
• Manufacturer: Newhaven Display
• Series: NHD-0416B1Z-Fr

Specifications of NHD-0416B1Z-FSPG-YBW-L-3V

• Display Type: STN - Super-Twisted Nematic
• Display Mode: Transflective
• Number Of Digits/alpha: 64
• Outline L X W X H: 87.00mm x 60.00mm x 14.00mm
• Viewing Area: 61.80mm L x 25.20mm W
• Backlight: LED - Green
• Display Format: 16 x 4
• Character Size: 4.75mm H x 2.95mm W
• Character Format: 5 x 8 Dots
• Voltage - Supply: 5.0V
• Dot Size: 0.55mm W x 0.55mm H
• Operating Temperature: -20°C ~ 70°C
• Character Count X Line: 16 x 4
• Module Size (w X H X T): 87 mm x 60 mm x 13.5 mm
• Features: Low Power Backlight
• Fluid Type: STN
• Background Color: Pure Green
• Voltage Rating: 3 V
• Operating Temperature Range: - 20 C to + 70 C
• Backlight Type: LED Yellow-Green
• Interface: Parallel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

NHD-0416B1Z
14.3 Reliability of LCM
Reliability test condition:
Recovery time should be 24 hours minimum. Moreover, functions, performance and appearance shall be free
from remarkable deterioration within 50,000 hours under ordinary operating and storage conditions room
temperature (20+8 C), normal humidity (below 65% RH), and in the area not exposed to direct sun light.
14.4 Precaution for using LCD/LCM
General Precautions:
Static Electricity Precautions:
any alteration or modification. The followings should be noted.
High temp. Storage
High temp. Operating
Low temp. Operating
LCD/LCM is assembled and adjusted with a high degree of precision. Do not attempt to make
1. LCD panel is made of glass. Avoid excessive mechanical shock or applying strong
2. The polarizer used on the display surface is easily scratched and damaged. Extreme care
3. Do not tamper in any way with the tabs on the metal frame.
4. Do not make any modification on the PCB without consulting Newhaven Display.
5. When mounting a LCM, make sure that the PCB is not under any stress such as bending
6. Avoid pressing on the metal bezel, otherwise the elastomer connector could be deformed
7. Be careful not to touch or swallow liquid crystal that might leak from a damaged cell. Any
Low temp. Storage
Temp. Cycle
1. CMOS-LSI is used for the module circuit; therefore operators should be grounded
2. Do not touch any of the conductive parts such as the LSI pads; the copper leads on
Humidity
pressure onto the surface of display area.
should be taken when handling. To clean dust or dirt off the display surface, wipe gently
with cotton, or other soft material soaked with isopropyl alcohol, ethyl alcohol or
trichlorotriflorothane, do not use water, ketone or aromatics and never scrub hard.
or twisting. Elastomer contacts are very delicate and missing pixels could result from
slight dislocation of any of the elements.
and lose contact, resulting in missing pixels and also cause rainbow on the display.
liquid crystal adheres to skin or clothes, wash it off immediately with soap and water.
Item
whenever he/she comes into contact with the module.
the PCB and the interface terminals with any parts of the human body.
(30 min
0 C
40 C/ 90%RH
Condition
-30 C
-20 C
25 C
80 C
70 C
5 min
20
50 C
30min)
Time (hrs)
Newhaven Display
10cycles
48
48
48
48
48
No abnormalities
and appearance
Assessment
in functions