IR3086AMPBF International Rectifier, IR3086AMPBF Datasheet - Page 30

• Manufacturer Part Number: IR3086AMPBF
• Description: IC PHASE CONTROLLER OVP 20MLPQ
• Manufacturer: International Rectifier
• Series: XPhase™r

Specifications of IR3086AMPBF

• Applications: Processor
• Current - Supply: 10mA
• Voltage - Supply: 8.4 V ~ 14 V
• Operating Temperature: 0°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 20-MLPQ
• Ic Function: Phase IC With Fault And OverTemp Detect
• Supply Voltage Range: 8.4V To 14V, 6V To 25V, 6V To 14V
• Operating Temperature Range: -40°C To +150°C
• Digital Ic Case Style: MLPQ
• No. Of Pins: 20
• Rohs Compliant: Yes
• Package: 20-Lead MLPQ
• Circuit: X-Phase Phase IC
• Iout (a): 2.5A Gate Driver
• Pbf: PbF Option Available
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *IR3086AMPBF

PCB Metal and Component Placement
• Lead land width should be equal to nominal part lead width. The minimum lead to lead spacing should be ≥
• Lead land length should be equal to maximum part lead length + 0.3 mm outboard extension + 0.05mm
• Center pad land length and width should be equal to maximum part pad length and width. However, the
• Four 0.3mm diameter vias shall be placed in the pad land spaced at 1.2mm, and connected to ground to
• No PCB traces should be routed nor vias placed under any of the 4 corners of the IC package. Doing so can
0.2mm to minimize shorting.
inboard extension. The outboard extension ensures a large and inspectable toe fillet, and the inboard
extension will accommodate any part misalignment and ensure a fillet.
minimum metal to metal spacing should be ≥ 0.17mm for 2 oz. Copper (≥ 0.1mm for 1 oz. Copper and ≥
0.23mm for 3 oz. Copper)
minimize the noise effect on the IC and to transfer heat to the PCB.
cause the IC to rise up from the PCB resulting in poor solder joints to the IC leads.
Page 30 of 33
IR3086APbF
May 13, 2009