LDP10IG10-A Panduit Corp, LDP10IG10-A Datasheet - Page 132

• Manufacturer Part Number: LDP10IG10-A
• Description: RACEWAY 1CHAN LG AD LGY(10=10')
• Manufacturer: Panduit Corp
• Series: Pan-Way™r

Specifications of LDP10IG10-A

• Wire Duct Type: Solid (Raceway), Single Channel
• Height: 0.860" (21.80mm)
• Length: 10.00' (3.05m)
• Width: 1.51" (38.4mm)
• Mounting Type: Adhesive
• Features: Attached Latching Lid
• Color: Gray, Light

Faceplates,
Furniture
LD Profile
Overview
Selection
Technical
Ultimate
Labeling
Twin-70
Glossary
Boxes &
System
System
Office
Outlet
Quick
Guide
TG-70
Index
Cove
T130
T-70
T-45
Pole
Info
ID
&
&
N4
ISO 9001 and ISO 14001
PANDUIT
ISO 9001
ISO 9001 is a voluntary international conformance standard for quality management systems worldwide.
It focuses on the overall effectiveness of the quality management system in meeting customer requirements.
This recognition indicates that we meet the most comprehensive international standards in design, purchasing,
manufacturing, testing, documentation, shipping and service.
ISO 14001
ISO 14001 is a voluntary international conformance standard for environmental systems worldwide. The overall
aim of this standard is to support environmental protection and prevention of pollution in balance with the
socioeconomic needs. This recognition provides a benchmark to gauge our efforts and to formally communicate
to our business partners about our commitment to continual improvement in environmental performance.
Mounting Guidelines
Low Voltage (Data) Installations
Data only raceway can be mounted with the factory adhesive backing for installation. The mounting surface must
be smooth and clean for the adhesive to bond properly.
Caution — Adhesive attachment is permanent! Removal may cause damage to mounting surface (i.e. may
remove paper from drywall etc.).
Power Installations
Power rated raceway must be securely fastened to the mounting surface as required by the NEC. UL requires
the mounting means to be appropriate for the mounting surface; meaning use a masonry fastener for attaching
to brick; a wood screw for attaching to studs, etc.
Flammability
This test method measures the comparative burning characteristics of solid plastic materials.
UL Vertical Burning Test
Test samples measure 125mm by 13mm by the minimum thickness of the end product. Tests are conducted
utilizing non-aged samples (as manufactured) and aged samples (7 days @ 70°C, 158° F.) A standard test
flame is applied for two 10 second applications to the unsupported end of a vertically clamped sample. The
afterflame time is recorded following the first flame application. Both afterflame and afterglow times are recorded
following the second flame application. Also observed and documented is if the sample drips flaming particles
that ignite the cotton layer below.
Materials Classed 94V-0 (Criteria)
• Afterflame for each sample does not exceed 10 seconds following the removal of each flame application
• Total afterflame time for a set of five samples following both flame applications is not greater that 50 seconds
• Afterflame plus afterglow time for each sample does not exceed 30 seconds following the second flame application
• A sample does not exhibit afterflame or afterglow up to the holding clamp
• The cotton blanket below the sample does not ignite from flaming particles or droplets from the test sample
‡ This test is conducted under controlled laboratory conditions. It does not represent the material response under actual fire conditions.
Order number of pieces required, in multiples of Standard Package Quantity.
®
Raceway Systems Division is registered to both ISO 9001 and ISO 14001 standards.
Prime items appear in BOLD.
‡