SAA1064/N2,112 NXP Semiconductors, SAA1064/N2,112 Datasheet - Page 14

• Manufacturer Part Number: SAA1064/N2,112
• Description: IC LED DRIVER 4DGT W/I2C 24-DIP
• Manufacturer: NXP Semiconductors

Specifications of SAA1064/N2,112

• Package / Case: 24-DIP (0.600", 15.24mm)
• Display Type: LED
• Configuration: 7 Segment + DP
• Interface: I²C
• Digits Or Characters: 4 Digits
• Current - Supply: 9.5mA
• Voltage - Supply: 4.5 V ~ 15 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Through Hole
• Number Of Digits: 4
• Number Of Segments: 7
• Low Level Output Current: 110 uA
• High Level Output Current: 110 mA
• Operating Supply Voltage: 2.5 V
• Maximum Supply Current: 14 mA
• Maximum Power Dissipation: 1000 mW
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-1107-5; 933973530112; SAA1064PN

Philips Semiconductors
POWER DISSIPATION
The total maximum power dissipation of the SAA1064 is made up by the following parts:
1. Maximum dissipation when none of the outputs are programmed (continuous line in Fig.7).
2. Maximum dissipation of each programmed output. The dashed line in Fig.7 visualises the dissipation when all the
3. Maximum dissipation of the programmed segment drivers which can be expressed as:
Under no conditions the total maximum dissipation (500 mW for the SO and 1000 mW for the DIL package) should be
exceeded.
February 1991
Where:
Example: V
4-digit LED-driver with I
segments are programmed (max. 16 in the static, and max. 32 in the dynamic mode). When less segments are
programmed one should take a proportional part of the maximum value.
P
add
= V
O
P
V
I
N
V
I
24 programmed segments in dynamic mode
P
O
O
add
O
CC
O
tot
I
O
= The additional power dissipation of the segment drivers
= The low state segment driver output voltage
= The programmed segment output current
= The number of programmed segments in the static mode, or half the number of
= 5 V
= 0.25 V
= 12 mA
= P
= 75 mW + (50 * 24/32) mW
= 148.5 mW
N.
programmed segment drivers in the dynamic mode.
1
+ P
2
+ P
3
2
C-Bus interface
(0.25 * 12.10
14
3
* 12) mW
Product specification
SAA1064