AT17F16-30JU Atmel, AT17F16-30JU Datasheet - Page 8

• Manufacturer Part Number: AT17F16-30JU
• Description: IC FLASH CONFIG 16M 20PLCC
• Manufacturer: Atmel

Specifications of AT17F16-30JU

• Programmable Type: FLASH
• Memory Size: 16Mb
• Voltage - Supply: 2.97 V ~ 3.63 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-LCC (J-Lead)
• Density: 16Mb
• Interface Type: Serial (2-Wire)
• Frequency (max): 33MHz
• Write Protection: No
• Operating Supply Voltage (typ): 3.3V
• Package Type: PLCC
• Operating Temp Range: -40C to 85C
• Supply Current: 40mA
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 20
• For Use With: ATDH2225 - CABLE ISP FOR AT17ATDH2200E - CONFIGURATOR PROGRAM BOARD KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9. Programming Mode
10. Standby Mode
8
AT17F16
The programming mode is entered by bringing SER_EN Low. In this mode the chip can be pro-
grammed by the 2-wire serial bus. The programming is done at V
super voltages are generated inside the chip. The AT17F parts are read/write at 3.3V nominal.
Refer to the AT17F Programming Specification available on the Atmel web site
(www.atmel.com) for more programming details. AT17F devices are supported by the Atmel
ATDH2200E programming system along with many third party programmers.
The AT17F Series Configurators enter a low-power standby mode whenever SER_EN is High
and CE is asserted High. In this mode, the AT17F Configurator consumes less than 5 mA of cur-
rent at 3.6V. The output remains in a high-impedance state regardless of the state of the OE
input.
CC
supply only. Programming
3392F–CNFG–2/08