2ED300E17-SFO_EVAL Infineon Technologies, 2ED300E17-SFO_EVAL Datasheet - Page 13

• Manufacturer Part Number: 2ED300E17-SFO_EVAL
• Description: Power Management IC Development Tools Eval Board 2ED300C17 -S/-ST IGBT drvr
• Manufacturer: Infineon Technologies
• Type: Power Driversr

Specifications of 2ED300E17-SFO_EVAL

• Product: Evaluation Boards
• Tool Is For Evaluation Of: 2ED300C17-S, 2ED300C17-ST
• Input Voltage: 15 V
• Dimensions: 165 mm x 91 mm x 30 mm
• Output Current: 30 A

Table of Contents
3.8
As mentioned in introduction of this application note the 2ED300E17-S evaluation board is prepared for easy
usage together with MA300Exx. To operate the MA300Exx it should be screwed to the PrimePACK™
module and connected by simple cable to one pair of 2ED300E17-SFO connectors e.g. X9 and X11. Parallel
IGBT module operation is also possible and maximum number of them in configuration presented on Figure
5 is three. Additional aluminium capacitors with minimum value of 100µF/35V connected in parallel across
C30, C35 and C40, C45 for module proper operation is required.
Table 9 presents resistors value needed for correct short circuit protection. When parallel module operation
is intended those resistors values must be recalculated accordingly to exaplme given in chapter 3.5.
Figure 5
Application Note
Operation with MA300E12 or MA300E17
Driver set for parallel PrimePACK™ IGBT module operation
Evaluation board for 2ED300C17-S /-ST IGBT driver
13
Page Schematic, Layout and Bill of Material
V1.11, 2008-02
AN2007-05