CRD5490-Z Cirrus Logic, CRD5490-Z Datasheet - Page 9

• Manufacturer Part Number: CRD5490-Z
• Description: Power Management IC Development Tools CS5463 Pwr Meas/Mntr Reference Design
• Manufacturer: Cirrus Logic
• Type: Energy Meterr

Specifications of CRD5490-Z

• Rohs: yes
• Product: Reference Design Boards
• Tool Is For Evaluation Of: CS5490
• Input Voltage: 90 VAC to 260 VAC
• Output Current: 15 A

3.2 Using the Software
Before launching the software, ensure that all of the cables connected to the CRD5490-Z are installed (as described
in the Hardware Overview section on page 4) and connect the board to an open USB port on the PC using the
provided cable. Once the board is powered through the AC line and USB, the software program can be launched.
3.3 Start-up Window
When the software is launched, the Cirrus Logic - Power Monitor window is displayed. This window contains
information about the software's title, version, and device revision number. See Figure 7.
The tabs in this window provide access to GUI functions. The following subsections describe the tabs in this window.
DS988RD1
The evaluation board connects directly to the AC power line and presents a serious risk of
exercised while handling this box. Make sure that the power source is off before wiring any
turned on. Make sure all AC power line wiring is secured to the box and away from contact
connection. Make sure that all connectors are well connected before the power source is
the box. Do not remove the protective cover from the CRD5490-Z when power is
electric shock and can cause serious injury or death. Extreme caution needs to be
When the CRD5490-Z is connected to AC lines, high voltage is present inside
Refer to additional warnings at the beginning of this document.
Figure 7. Cirrus Logic - Power monitor Window
before the power source is on.
High Voltage Hazard
WARNING
connected.
CRD5490-Z
9