DM330023-2 Microchip Technology, DM330023-2 Datasheet - Page 26

• Manufacturer Part Number: DM330023-2
• Description: Power Management IC Development Tools dsPICDE MCHV-2
• Manufacturer: Microchip Technology
• Type: Motor / Motion Controllers & Driversr

Specifications of DM330023-2

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: PIC24F, PIC24E, dsPIC33F, dsPIC33E
• Input Voltage: 90 V to 265 V
• Output Voltage: 15 V
• Interface Type: UART
• Output Current: 0.75 A
• For Use With: PIC24F, PIC24E, dsPIC33F, dsPIC33E

DS52074A-page 26
3. Connect the communication ports.
4. Connect the USB cable to the mini-USB female connector labeled
5. Ensure that the appropriate matrix board is plugged into the connector labeled
FIGURE 2-6:
6. Power Cord connection. Make sure the power cord is disconnected from the AC
Note:
Note:
Note:
a) If RS-232 communication is used, connect the DB9 male connector to the
b) If USB communication is used, connect the mini-USB male terminal to the
“Program/Debug” (14 in
ports of the host PC.
J4 and that the board is oriented so that its pins are correctly lined up, as shown
in
regarding the matrix board.
mains before connecting the female terminal of the power cable to the AC input
connector (1, 2, and 3 in
Board.
Figure
RS-232 port. Connect the other end to the host PC (12 in
mini-USB female connector labeled “USB” (12 in
other end to the host PC.
The Microchip serial emulator driver (mchpcdc.inf) should be installed on
your PC in order to activate the USB-to-Serial emulator. The emulator can
be obtained from the dsPICDEM MCHV-2 Development Board product
page:
The built-in programmer/debugger is supported in MPLAB IDE Version
8.83 (or higher) and MPLAB X Version 1.10 (or higher).
The unit is designed to be connected to the AC mains supply via a standard
non-locking plug. As the unit has no mains switch, this plug constitutes the
means of disconnection from the supply. Therefore, the user must have
unobstructed access to this plug during operation.
2-6. Refer to
http://www.microchip.com/mchv2
MATRIX BOARD CONNECTION
Section 4.2.5 “Matrix Board”
Figure
Figure
2-5). Connect the USB male terminal to the USB
2-5) of the dsPICDEM™ MCHV-2 Development
Figure
for more information
 2012 Microchip Technology Inc.
2-5). Connect the
Figure
2-5).