Si4702-D30-GMR Silicon Labs, Si4702-D30-GMR Datasheet - Page 26

• Manufacturer Part Number: Si4702-D30-GMR
• Description: Tuners BRDCAST FM RADIO TNR
• Manufacturer: Silicon Labs

Specifications of Si4702-D30-GMR

• Rohs: yes
• Function: Radio
• Operating Supply Voltage: 2.7 V to 5.5 V
• Minimum Operating Temperature: - 20 C
• Maximum Operating Temperature: + 85 C
• Maximum Frequency: 108 MHz
• Minimum Frequency: 76 MHz
• Mounting Style: SMD/SMT
• Package / Case: QFN-20
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 2.7 V

Si4702/03-C19
Register 04h. System Configuration 1
Reset value = 0x0000
26
Name
Type
Bit
9:8
6:7
5:4
15
14
13
12
11
10
Bit
BLNDADJ[1:0] Stereo/Mono Blend Level Adjustment.
RDSIEN
GPIO3[1:0]
D15
Reserved
Reserved
R/W
RDSIEN
STCIEN
AGCD
Name
RDS
DE
STCIEN
D14
R/W
RDS Interrupt Enable.
0 = Disable Interrupt (default).
1 = Enable Interrupt.
Setting RDSIEN = 1 and GPIO2[1:0] = 01 will generate a 5 ms low pulse on GPIO2 when
the RDSR 0Ah[15] bit is set.
Seek/Tune Complete Interrupt Enable.
0 = Disable Interrupt (default).
1 = Enable Interrupt.
Setting STCIEN = 1 and GPIO2[1:0] = 01 will generate a 5 ms low pulse on GPIO2 when
the STC 0Ah[14] bit is set.
Reserved.
Always write to 0.
RDS Enable.
0 = Disable (default).
1 = Enable.
De-emphasis.
0 = 75 µs. Used in USA (default).
1 = 50 µs. Used in Europe, Australia, Japan.
AGC Disable.
0 = AGC enable (default).
1 = AGC disable.
Reserved.
Always write to 0.
Sets the RSSI range for stereo/mono blend.
00 = 31–49 RSSI dBµV (default).
01 = 37–55 RSSI dBµV (+6 dB).
10 = 19–37 RSSI dBµV (–12 dB).
11 = 25–43 RSSI dBµV (–6 dB).
ST bit set for RSSI values greater than low end of range.
General Purpose I/O 3.
00 = High impedance (default).
01 = Mono/Stereo indicator (ST). The GPIO3 will output a logic high when the device is in
stereo, otherwise the device will output a logic low for mono.
10 = Low.
11 = High.
D13
R/W
0
D12
RDS
R/W
D11
R/W
DE
AGCD
D10
R/W
Rev. 1.1
R/W
D9
0
R/W
D8
0
Function
BLNDADJ[1:0]
D7
R/W
D6
D5
GPIO3[1:0]
R/W
D4
D3
GPIO2[1:0]
R/W
D2
D1
GPIO1[1:0]
R/W
D0