LBEE5ZSTNC-523 Murata Wireless Solutions, LBEE5ZSTNC-523 Datasheet - Page 33

• Manufacturer Part Number: LBEE5ZSTNC-523
• Description: WiFi / 802.11 Modules 802.11b/g/n WiFi BT Type TN Module
• Manufacturer: Murata Wireless Solutions

Specifications of LBEE5ZSTNC-523

• Rohs: yes
• Protocol Supported: 802.11 b/g/n, Bluetooth
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps, 65 Mbps
• Interface Type: UART
• Transmit Power (max): 20 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 1.8 V, 3.6 V
• Supply Current Transmitting: 250 mA
• Supply Current Receiving: 90 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 17 mm x 10 mm x 2.2 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: CCK, OFDM

 Disclaimer
Please read this notice before using the Murata Wireless Modules.
1.
2.
.
- Aircraft equipment.
- Aerospace equipment
- Undersea equipment.
- Power plant control equipment
- Medical equipment.
- Transportation equipment (vehicles, trains, ships, etc.).
- Traffic signal equipment.
- Disaster prevention / crime prevention equipment.
- Data-processing equipment
- Application of similar complexity and/ or reliability requirements to the applications listed in the
Notwithstanding the foregoing, the product shall not be used in any application listed below
which requires especially high reliability for the prevention of such defect as may directly cause
damage to the third party's life, body or property.
Please note that the only warranty that Murata Manufacturing Co., Ltd. (“Murata”) provides
regarding the products is its conformance to the specifications provided herein. Accordingly,
Murata shall not be responsible for any defects in products or equipment incorporating such
products, which are caused under the conditions other than those specified in this specification.
The product is designed and manufactured for general consumer applications, and not for any
particular application, so testing and use of the product shall be conducted at your own risk and
responsibility. Specifically, please observe the following:
MURATA HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST
INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS.
YOU AGREE TO INDEMNIFY AND DEFEND MURATA AND ITS AFFILIATES AGAINST ALL
CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING
WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF PRODUCTS.
i)
ii)
iii) Since the application of static electricity or overvoltage may cause defect in the product or
iv) Caution shall be taken to avoid overstress to the product during and after the soldering
v)
vi) In case the product is to be used in equipment or electric circuit that requires high safety or
above.
Please conduct validation and verification of the products in actual condition of mounting and
Please pay attention to minimize any mechanical vibration or shock, not to drop the product
Since the applied soldering method may deteriorate the reliability, thorough evaluation is
operating environment before commercial shipment of the equipment.
or a substrate that contains the product during transportation.
deterioration of its reliability, caution must be taken against exposure to any static electricity
generated by electrified items such as work benches, soldering irons, tools, carrying
containers, etc.
process.
recommended.
reliability function or performances, sufficient reliability evaluation check for safety shall be
performed before commercial shipment and moreover, due consideration to install a
protective circuit is strongly recommended at customer's design stage. Please provide and
appropriate fail-safe function on your product to prevent any damages that may be caused by
the abnormal function or the failure of our product.
Preliminary Specification Number: SP-ZSTN
P.33/34