LBEE5ZSTNC-523 Murata Wireless Solutions, LBEE5ZSTNC-523 Datasheet - Page 30

• Manufacturer Part Number: LBEE5ZSTNC-523
• Description: WiFi / 802.11 Modules 802.11b/g/n WiFi BT Type TN Module
• Manufacturer: Murata Wireless Solutions

Specifications of LBEE5ZSTNC-523

• Rohs: yes
• Protocol Supported: 802.11 b/g/n, Bluetooth
• Frequency Band: 2.4 GHz
• Data Rate: 11 Mbps, 54 Mbps, 65 Mbps
• Interface Type: UART
• Transmit Power (max): 20 dBm
• Antenna Connector Type: U.FL
• Operating Supply Voltage: 1.8 V, 3.6 V
• Supply Current Transmitting: 250 mA
• Supply Current Receiving: 90 mA
• Maximum Operating Temperature: + 70 C
• Dimensions: 17 mm x 10 mm x 2.2 mm
• Minimum Operating Temperature: - 30 C
• Modulation Technique: CCK, OFDM

Temperature (deg.C)
5. Soldering Conditions:
Carefully perform preheating so that the temperature difference (△T) between the solder and
products surface should be in the following range. After mounting, pay special attention to maintain
the temperature difference within 100deg.C. Soldering must be carried out by the above mentioned
conditions to prevent products from damage. Contact Murata before use if concerning other
soldering conditions.
- Soldering iron method conditions are indicated below.
- Diameter of iron-tip : Φ3.0mm max.
Use rosin type flux or weakly active flux with a chlorine content of 0.2wt% or less.
220deg.C
Soldering iron method
Reflow method
Item
Soldering iron wattage
Temperature of iron-tip
Iron contact time

Soldering method
Reflow soldering standard conditions (Example)
Kind of iron
Pre-heating
within 120s.
Ceramics heater
△T<130deg.C
Preliminary Specification Number: SP-ZSTN
Temperature
250 to 260deg.C
<350deg.C
within 3s.
<18W
within 60s.
within 3s.
Cooling down
Slowly
Time (s.)
P.30/34