SiM3C167-B-GM Silicon Labs, SiM3C167-B-GM Datasheet - Page 37

• Manufacturer Part Number: SiM3C167-B-GM
• Description: ARM Microcontrollers - MCU 256KB LGA92
• Manufacturer: Silicon Labs

Specifications of SiM3C167-B-GM

• Rohs: yes
• Core: ARM Cortex M3
• Processor Series: SIM3C1xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 80 MHz
• Program Memory Size: 256 KB
• Data Ram Size: 47 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.8 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: LGA-92
• Mounting Style: SMD/SMT
• Interface Type: 2 x I2C, I2S, 3 x SPI, 2 x USART, 2 x UART
• Number Of Programmable I/os: 80
• Number Of Timers: 17 x 32 bit
• Supply Voltage - Max: 3.6 V

4.3. Clocking
The SiM3C1xx devices have two system clocks: AHB and APB. The AHB clock services memory peripherals and
is derived from one of seven sources: the RTC0 timer clock (RTC0TCLK), the Low Frequency Oscillator, the Low
Power Oscillator, the divided Low Power Oscillator, the External Oscillator, and the PLL0 Oscillator. In addition, a
divider for the AHB clock provides flexible clock options for the device. The APB clock services data peripherals
and is synchronized with the AHB clock. The APB clock can be equal to the AHB clock (if AHB is less than or equal
to 50 MHz) or set to the AHB clock divided by two.
Clock Control allows the AHB and APB clocks to be turned off to unused peripherals to save system power. Any
registers in a peripheral with disabled clocks will be unable to be accessed until the clocks are enabled. Most
peripherals have clocks off by default after a power-on reset.
RTC0TCLK
Oscillator
Oscillator
LFOSC0
LPOSC0
External
PLL0
AHB Clock
APB Clock
Divider
Divider
Clock Control
Rev.1.0
APB clock
PLL0 Registers
PBCFG and
PB0/1/2/3/4
AHB clock
USART0
USART1
UART0
SiM3C1xx
Flash
EMIF
RAM
DMA
37