IS42S16400F-5BLI ISSI, IS42S16400F-5BLI Datasheet - Page 10
![no-image](/images/no-image-200.jpg)
IS42S16400F-5BLI
Manufacturer Part Number
IS42S16400F-5BLI
Description
DRAM 64M (4Mx16) 200MHz Industrial Temp
Manufacturer
ISSI
Datasheet
1.IS45S16400F-5BLA1.pdf
(59 pages)
Specifications of IS42S16400F-5BLI
Product Category
DRAM
Rohs
yes
Data Bus Width
16 bit
Package / Case
TFBGA-54
Memory Size
64 Mbit
Maximum Clock Frequency
200 MHz
Access Time
6 ns, 5 ns
Supply Voltage - Max
3.6 V
Supply Voltage - Min
3 V
Maximum Operating Current
150 mA
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 40 C
Mounting Style
SMD/SMT
Factory Pack Quantity
286
IS42S16400F
IS45S16400F
10
3. Current state definitions:
4. The following states must not be interrupted by a command issued to the same bank. COMMAND INHIBIT or NOP commands,
5. The following states must not be interrupted by any executable command; COMMAND INHIBIT or NOP commands must be
6. All states and sequences not shown are illegal or reserved.
7. Not bank-specific; requires that all banks are idle.
8. May or may not be bank-specific; if all banks are to be precharged, all must be in a valid state for precharging.
9. Not bank-specific; BURST TERMINATE affects the most recent READ or WRITE burst, regardless of bank.
10. READs or WRITEs listed in the Command (Action) column include READs or WRITEs with auto precharge enabled and
11. Does not affect the state of the bank and acts as a NOP to that bank.
or allowable commands to the other bank should be issued on any clock edge occurring during these states. Allowable com-
mands to the other bank are determined by its current state and CURRENT STATE BANK n truth tables.
applied on each positive clock edge during these states.
READs or WRITEs with auto precharge disabled.
Precharge Enabled: Starts with registration of a READ command with auto precharge enabled and ends when t
Precharge Enabled: Starts with registration of a WRITE command with auto precharge enabled and ends when t
Row Activating: Starts with registration of an ACTIVE command and ends when t
Accessing Mode
Precharging All: Starts with registration of a PRECHARGE ALL command and ends when t
Read w/Auto
Precharging: Starts with registration of a PRECHARGE command and ends when t
Write w/Auto
Row Active: A row in the bank has been activated, and t
Refreshing: Starts with registration of an AUTO REFRESH command and ends when t
Register: Starts with registration of a LOAD MODE REGISTER command and ends when t
Read: A READ burst has been initiated, with auto precharge disabled, and has not yet terminated or been termi-
Write: A WRITE burst has been initiated, with auto precharge disabled, and has not yet terminated or been termi-
Idle: The bank has been precharged, and t
accesses are in progress.
nated.
nated.
will be in the idle state.
be in the row active state.
met. Once t
met. Once t
SDRAM will be in the all banks idle state.
t
banks will be in the idle state.
mrd
is met, the SDRAM will be in the all banks idle state.
rp
rp
is met, the bank will be in the idle state.
is met, the bank will be in the idle state.
rp
has been met.
rcd
has been met. No data bursts/accesses and no register
Integrated Silicon Solution, Inc. — www.issi.com
rcd
is met. Once t
rp
is met. Once t
rc
rp
is met. Once t
is met. Once t
mrd
rcd
has been met. Once
is met, the bank will
rp
is met, the bank
rp
rc
rp
rp
has been
is met, the
is met, all
has been
12/01/2011
Rev. I