SRT512-SBN18/1G2 STMICROELECTRONICS [STMicroelectronics], SRT512-SBN18/1G2 Datasheet - Page 13

• Manufacturer Part Number: SRT512-SBN18/1G2
• Description: 13.56 MHz short-range contactless memory chip with 512-bit EEPROM and anticollision functions
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

SRT512
3.4
CRC
The 16-bit CRC used by the SRT512 is generated in compliance with the ISO14443 type B
recommendation. For further information, please see
contents are all 1s: FFFFh.
The two-byte CRC is present in every request and in every answer frame, before the EOF.
The CRC is calculated on all the bytes between SOF (not included) and the CRC field.
Upon reception of a request from a reader, the SRT512 verifies that the CRC value is valid.
If it is invalid, the SRT512 discards the frame and does not answer the reader.
Upon reception of an answer from the SRT512, the reader should verify the validity of the
CRC. In case of error, the actions to be taken are the reader designer’s responsibility.
The CRC is transmitted with the least significant byte first and each byte is transmitted with
the least significant bit first.
Figure 11. CRC transmission rules
LSbit
CRC 16 (8 bits)
LSByte
Doc ID 13277 Rev 4
MSbit
LSbit
Appendix
A. The initial register
CRC 16 (8 bits)
MSByte
Data transfer
ai07667
MSbit
13/46