S72NS-P SPANSION [SPANSION], S72NS-P Datasheet - Page 3

• Manufacturer Part Number: S72NS-P
• Description: MirrorBit Flash Memory and DRAM
• Manufacturer: SPANSION [SPANSION]

Features
General Description
This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in
this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.
This document contains information on the S72NS-P MCP stacked products. Refer to the S29NS-P data sheet (S29NS-P_00)
for full electrical specifications of the Flash memory component.
The S72NS Series is a product line of stacked products (MCPs and PoPs), and consists of:
The products covered by this document are listed in the tables below.
For detailed specifications, please refer to the individual data sheets.
S72NS-P Based MCPs/PoPs
MirrorBit
128/256/512 Mb (8/16/32 M x 16 bit), 1.8 Volt-only,
Multiplexed Simultaneous Read/Write, Burst Mode Flash
Memory
128/256 Mb (8/16 M x 16 bit) DDR DRAM on Split Bus
Data Sheet (Advance Information)
Power supply voltage of 1.7 V to 1.95 V
Burst Speeds
NS family multiplexed Flash memory die
DDR DRAM
– Flash = 66 MHz, 80 MHz
– DRAM = 133 MHz
™
Publication Number S72NS-P_00
Flash Memory and DRAM
Flash Density
Density
Density
128 Mb
256 Mb
512 Mb
128
256
S72NS128PD0
S72NS256PD0
S72NS512PD0
Manufacturer
Manufacturer
DRAM1
DRAM5
DRAM1
DRAM5
128 Mb
Revision 01
Packages
Operating Temperature of –25°C to +85°C
– 11.0 x 10.0 mm, 133-ball MCP
– 8.0 x 8.0 mm, 133-ball MCP
– 12.0 x 12.0 mm, 128-ball PoP
DRAM Density
Issue Date September 6, 2006
Publication Number
Publication Number
S72NS512PE0
SDRAM_03
SDRAM_07
SDRAM_11
256 Mb
TBD